| Name: | Description: | Size: | Format: | |
|---|---|---|---|---|
| 2.85 MB | Adobe PDF | |||
| 7.8 MB | Adobe PDF | |||
| 21.88 KB | Adobe PDF | |||
| 2.84 MB | Adobe PDF | |||
| 37.04 KB | Adobe PDF |
Authors
Advisor(s)
Abstract(s)
O presente documento insere-se no âmbito do Trabalho Final de Metrado do Curso de Engenharia Civil, e compreende o dimensionamento de um Edifício Misto destinado a uma Ensacagem de Cimento.
Na fase inicial deste trabalho apresenta-se a geometria do Edifício, os materiais utilizados, as ações e combinações de ações de acordo com os Eurocódigos Estruturais.
A segunda parte do trabalho inclui os cálculos justificativos dos elementos em betão armado e metálicos segundo a NP EN 1992, a NP EN 1993 e a NP EN 1997, com base nas envolventes máximas dos esforços obtidos no programa de cálculo automático de elementos finitos utilizado ʺSAP2000ʺ.
Foram também utilizados outros programas de cálculo, tais como: o ʺGala Reinforcementʺ, o ʺSemiCompʺ, o ʺRobot Structural Analysisʺ, tendo-se recorrido igualmente à realização de folhas de cálculo em ʺExcelʺ, desenvolvidas para diversos casos, de modo a validar e comparar os resultados obtidos.
No final do trabalho apresentam-se as peças desenhadas.
De modo a ultrapassar algumas dificuldades encontradas no decorrer deste projeto, e consolidar também os conhecimentos adquiridos ao longo do Mestrado, foram consultados alguns livros da especialidade, bem como outros projetos (peças escritas e peças desenhadas).
Abstract: This document is part of the final work done in the Master Degree in Structural Engineering, which is aimed to design a Mixed Building to Bagging Cement. In the initial phase of the work are presented the building, the used materials, actions and combinatied actions, according to the Eurocodes. The second part of the work presents the supporting calculations, where the design of the elements (concrete and steel) was done according to the NP EN 1992, NP EN 1993 and NP EN 1997, based on the results obtained from an automatic calculation program of finite elements - "SAP2000." There were also used other calculation programs, such as: "GaLa Reinforcement", "SemiComp", "Robot Strutural Analysis" and "Excel" to perform spreadsheet calculations to compare and validate all the results. At last, the project drawings are presented. In order to overcome some difficulties experienced during this project and also toconsolidate the knowledge acquired during the Master Degree, some technical books as well as some other projects were consulted.
Abstract: This document is part of the final work done in the Master Degree in Structural Engineering, which is aimed to design a Mixed Building to Bagging Cement. In the initial phase of the work are presented the building, the used materials, actions and combinatied actions, according to the Eurocodes. The second part of the work presents the supporting calculations, where the design of the elements (concrete and steel) was done according to the NP EN 1992, NP EN 1993 and NP EN 1997, based on the results obtained from an automatic calculation program of finite elements - "SAP2000." There were also used other calculation programs, such as: "GaLa Reinforcement", "SemiComp", "Robot Strutural Analysis" and "Excel" to perform spreadsheet calculations to compare and validate all the results. At last, the project drawings are presented. In order to overcome some difficulties experienced during this project and also toconsolidate the knowledge acquired during the Master Degree, some technical books as well as some other projects were consulted.
Description
Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil Estruturas
Keywords
Citation
SILVA, Pedro Miguel Guerreiro da - Dimensionamento de um edifício misto de ensacagem a construir numa instalação industrial. Lisboa: Instituto Superior de Engenharia de Lisboa, 2016. Dissertação de mestrado.
Publisher
Instituto Superior de Engenharia de Lisboa