Loading...
19 results
Search Results
Now showing 1 - 10 of 19
- Indoor positioning and intuitive advertising using visible light communicationPublication . Vieira, Manuela; Vieira, Manuel; Louro, Paula; Fantoni, Alessandro; Vieira, PedroThis paper researches the applicability of an intuitive advertising system for large indoor environments using Visible Light Communication (VLC). This VLC based positioning system includes the use of the visible light signal to light the space and to transmit the information for travelers’ positioning and of advertising campaigns in the surroundings. White RGB-LEDs, whose original function is providing illumination, are used as transmitters due to the ability of each individual chip to switch quickly enough to transfer data. This functionality is used for communication where the multiplexed data can be encoded in the emitting light. The light signals emitted by the LEDs positioned in the area of the advertising campaign are interpreted directly by the customers’ receivers. A SiC optical sensor with light filtering and demultiplexing properties receives the modulated signals containing the ID and the geographical position of the LED and other information, demultiplexes and decodes the data and locates the mobile device in the environment. Different layouts are analysed: square and hexagonal meshes are tested, and a 2D localization design, demonstrated by a prototype implementation, is presented. The key differences between both topologies are discussed. For both, the transmitted information, indoor position and motion direction of the customer are determined. The results showed that the LED-aided VLC navigation system enables to determine the position of a mobile target inside the network, to infer the travel direction as a function of time and to interact with information received.
- Wayfinding services in crowded buildings through visible lightPublication . Vieira, Manuela; Vieira, Manuel; Louro, Paula; Fantoni, Alessandro; Vieira, PedroThis paper investigates the applicability of an intuitive risk of transmission wayfinding system in public spaces, virtual races, indoor large environments and complex buildings using Visible Light Communication (VLC). Typical scenarios include: finding places, like a particular shop or office, guiding users across different floors, and through elevators and stairs. The system is able to inform the users, in real time, not only of the best route to the desired destination, through a route without clusters of users, but also of crowded places. Data from the sender is encoded, modulated and converted into light signals emitted by the transmitters. Tetra-chromatic white sources are used providing a different data channel for each chip. At the receiver side, the modulated light signal, containing the ID and the 3D geographical position of the transmitter and wayfinding information, is received by a SiC optical sensor with light filtering and demultiplexing properties. Since lighting and wireless data communication is combined, each luminaire for downlink transmission becomes a single cell, in which the optical Access Point (AP) is located in the ceiling and the mobile users are scattered across the overlap discs of each cell, underneath. The light signals emitted by the LEDs are interpreted directly by the receivers of the positioned users. Bidirectional communication is tested. The effect of the location of the Aps is evaluated and a 3D model for the cellular network is analyzed. In order to convert the floorplan to a 3D geometry, a tandem of layers in a orthogonal topology is used, and a 3D localization design, demonstrated by a prototype implementation, is presented. Uplink transmission is implemented, and the 3D best route to navigate through venue is calculated. Buddy wayfinding services are also considered. The results showed that the dynamic VLC navigation system enables to determine the position of a mobile target inside the network, to infer the travel direction along the time, to interact with received information and to optimize the route towards a static or dynamic destination.
- Footprint model in a navigation system based on visible light communicationPublication . Louro, Paula; Vieira, Manuela; Vieira, Manuel; Lima, Mirtes de; Rodrigues, João; Vieira, PedroIndoor navigation is hardly managed by the usual Global Positioning System (GPS) due to the strong attenuation of signals inside the buildings. Alternative based on RF optical, magnetic or acoustic signals can be used. Among the optical technologies, Visible Light Communication (VLC) provides good position accuracy. The proposed system uses commercial RGB white LEDs for the generation of the light, which is simultaneously coded and modulated to transmit information. The receiver includes a multilayered photodetector based on a-SiC:H operating in the visible spectrum. The positioning system includes multiple, identical navigation cells. Inside each cell, the optical pattern defined by the VLC transmitters establishes specific spatial regions assigned each to different optical excitations, which configures the footprint of the navigation cell. Demodulation and decoding procedures of the photocurrent signal measured by the photodetector are used to identify the input optical excitations and enable position recognition inside the cell. The footprint model is characterized using geometrical and optical assumptions, namely the Lambertian model for the LEDs and the evaluation of the channel gain of the VLC link. An algorithm to decode the information is established and the positioning accuracy is discussed. The experimental results confirmed that the proposed VLC architecture is suitable for the intended application.
- Cooperative vehicular communication systems based on visible light communicationPublication . Vieira, Manuel; Vieira, Manuela; Louro, Paula; Vieira, PedroThe use of visible light communication (VLC) in vehicular communication systems for vehicle safety applications is proposed. The system aims to ensure the communication between a LED-based VLC emitter and an on-vehicle VLC receiver. A traffic scenario is established. Vehicle-to-vehicle (V2V) and infrastructure-to-vehicle (12V) communications are analyzed. For the V2V communication study, the emitter was developed based on the vehicle headlights, whereas for the study of 12V communication system, the emitter was built based on streetlights. The VLC receiver is based on amorphous SiC technology and enhances the conditioning of the signal enabling to decode the transmitted information. Receivers are located at the rooftop of the vehicle, for 12V communications, and at the tails for V2V reception. Clusters of emitters, in a square topology, are used in the 12V transmission. The information and the ID code of each emitter in the network are sent simultaneously by modulating the individual chips of the trichromatic white LED. Free space is the transmission medium. An on-off code is used to transmit data. An algorithm to decode the information at the receivers is set. The proposed system was tested. The experimental results confirmed that the proposed cooperative VLC architecture is suitable for the intended applications.
- Geolocation and communication in unfamiliar indoor environments through visible lightPublication . Vieira, Manuela; Vieira, Manuel; Louro, Paula; Fantoni, Alessandro; Vieira, PedroTo support people’s wayfinding activities in unfamiliar indoor environments, a method able to generate ceiling landmark route instructions using Visible Light Communication (VLC) is proposed. The system is composed of several transmitters (ceiling luminaries) which send the map information and path messages required to wayfinding. Mobile optical receivers, using joint transmission, extracts theirs location to perform positioning and, concomitantly, the transmitted data from each transmitter. Bidirectional communication between the emitters and the receivers is available in strategic optical access point. Typical scenarios are simulated and include finding places and guiding users across different floors. Data from the sender is encoded, modulated and converted into light signals emitted by the transmitters. Tetra-chromatic white sources are used, providing a different data channel for each chip. At the receiver, the modulated light signal, containing the ID and the 3D geographical position of the transmitter and wayfinding information, is received by SiC photodetectors with light filtering and demultiplexing properties. Since lighting and wireless data communication is combined, each luminaire for downlink transmission become a single cell, in which the optical access point (AP) is located. The coded light signals are interpreted directly by the receivers of the users positioned underneath. The effect of the location of the APs is evaluated and a model for the different cellular networks is analyzed. Orthogonal and hexagonal topologies are tested, and a 3D localization design, demonstrated by a prototype is presented. Uplink transmission is implemented and the 3D best route to navigate through venue calculated. The results show that the system make possible to determine the position of a mobile target inside the network, to infer the travel direction along the time and to interact with information received and optimize the route towards a static or dynamic destination.
- Optical communication applications based on white LEDsPublication . Louro, Paula; Vieira, Manuel; Vieira, Manuela
- Indoor self-localization and wayfinding services using visible light communication: a modelPublication . Vieira, Manuela; Vieira, Manuel; Louro, Paula; Rodrigues, João; Vieira, PedroVisible Light Communication (VLC) is a promising technology that can jointly be used to accomplish the typical lighting functionalities of the Light-Emitting Diodes (LEDs) and data transmission, where light intensity can be modulated on a high rate that cannot be noticed by the human eye. A VLC cooperative system that supports guidance services and uses an edge/fog based architecture for wayfinding services is presented. The dynamic navigation system is composed of several transmitters (luminaries) which send the map information and path messages required to wayfinding. Each luminaire for downlink transmission is equipped with one two type of controllers: mesh controller and cellular controllers to forward messages to other devices in the vicinity or to the central manager services. Data from the luminaires is encoded, modulated and converted into light signals emitted by the transmitters. Tetra-chromatic white sources, located in ceiling landmarks, are used providing a different data channel for each chip. Mobile optical receivers, collect the data, extracts theirs location to perform positioning and, concomitantly, the transmitted data from each transmitter. Uplink transmission is implemented and the best route to navigate through venue calculated. The results show that the system allows determining the position of a mobile target inside the network, to infer the travel direction along the time and to interact with information received optimizing the route towards the destination.
- Bi-directional communication between infrastructures and vehicles through visible lightPublication . Vieira, Manuel; Vieira, Manuela; Louro, Paula; Vieira, PedroIn this paper a vehicular communication system that incorporates illumination, signaling, communications, and positioning functions is presented. The bidirectional communication between the infrastructures and the vehicles (I2V), between vehicles (V2V) and from the vehicles to the infrastructures (V2I) is performed through Visible Light Communication (VLC) using the street lamps and the traffic signaling LEDs to broadcast the information. As receivers and decoders, pin/pin SiC Wavelength Division Multiplex (WDM) photodetectors, with light filtering properties, are being used. White polychromatic-LEDs are used for lighting and to implement the WDM. This allows modulating separate data streams on four colors which together multiplex to white light. A traffic scenario is proposed, along with the transmitter to receiver setup. The performance of a cooperative driving system is evaluated. To achieve cooperative vehicular communications (I2V2V2I2V), streams of messages containing the ID physical address of the emitters are used, transmitting a codeword that is received and decoded by the receivers. As a proof of concept, a I2V2V2IV traffic scenario is presented, bidirectional communication between the infrastructures and the vehicles is established and tested. The experimental results confirm that the cooperative vehicular VLC architecture is a promising approach concerning communications between road infrastructures and cars, fulfilling data privacy.
- On the use of visible light communication in cooperative vehicular communication systemsPublication . Vieira, Manuel; Vieira, Manuela; Louro, Paula; Vieira, PedroThe paper proposes the use of Visible Light Communication (VLC) in Vehicular Communication Systems for vehicle safety applications. A smart vehicle lighting system that combines the functions of illumination, signaling, communications, and positioning is presented. The system aims to ensure the communication between a LED based VLC emitter and an on-vehicle VLC receiver. A traffic scenario is stablished. Vehicle-to-vehicle (V2V) and Infrastructure-to-Vehicle (I2V) communications are analyzed. For the V2V communication study, the emitter was developed based on the vehicle head lights, whereas for the study of I2V communication system, the emitter was built based on streetlights. The VLC receiver is used to extract the data from the modulated light beam coming from the white RGB-LEDs emitters. The VLC receiver is based on amorphous SiC technology and enhances the conditioning of the signal enabling to decode the transmitted information. The [p(SiC:H)/i(SiC:H)/n(SiC:H)/p(SiC:H)/i(Si:H)/n(Si:H)] tandem photodetectors are located at the roof-top of the vehicle, for I2V communications, and at the tails for V2V reception. Clusters of emitters, in a square topology, are used in the I2V transmission. The information and the ID code of each emitter in the network are sent, simultaneously, by modulating the individual chips of the trichromatic white LED. Free space is the transmission medium. An on-off code is used to transmit data. An algorithm to decode the information at the receivers is set. The proposed system was tested. The experimental results, confirmed that the proposed cooperative VLC architecture is suitable for the intended applications.
- Transmission of signals using white LEDs for VLC applicationsPublication . Louro, Paula; Silva, V.; Rodrigues, I.; Vieira, Manuel; Vieira, ManuelaIn this paper an integrated wavelength optical filter and photodetector for Visible Light Communication (VLC) is used. The proposed application uses indoor warm light lamps lighting using ultra-bright white LEDs pulsed at frequencies higher than the ones perceived by the human eye. The system was analyzed using two different types the white LEDs, namely, phosphor and trichromatic based LEDs. The signals were transmitted into free space and the generated photocurrent was measured by the pin-pin photodetector based on a-SiC:H/a-Si:H. This device operates in the visible spectrum, allowing thus the detection of the pulsed white light emitted by the LEDs. However, as it also works as a visible optical filter with controlled wavelength sensitivity through the use of adequate optical biasing light, it is able to detect different wavelengths. This feature allows the detection of the individual components of the tri-chromatic white LED, which enlarges the amount of information transmitted by this type of white LED, when compared to the phosphor based LED. A capacitive optoelectronic model supports the experimental results and the physical operation of the device. A numerical simulation is presented.