Loading...
4 results
Search Results
Now showing 1 - 4 of 4
- Bayesian assessment of an existing bridge: a case studyPublication . Jacinto, Luciano; Neves, Luís Canhoto; Santos, LuísNowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive”. Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.
- Metodologias probabilísticas na avaliação da segurança de pontes existentesPublication . Jacinto, Luciano; Oliveira Santos, Luís; Neves, Luís C.Na avaliação da segurança de pontes existentes a incerteza é substancialmente diferente da presente na fase de projeto, por duas razões principais: (1) a possibilidade de redução de incerteza por meio de informação colhida da ponte (realização de ensaios não destrutivos, por exemplo) e (2) aumento da incerteza devido à eventual presença de deterioração. Neste trabalho, fazendo uso de metodologias probabilísticas, e em particular metodologias Bayesianas, discute-se a avaliação da segurança de pontes de betão armado considerando explicitamente estes efeitos.
- Probabilistic models for mechanical properties of prestressing strandsPublication . Jacinto, Luciano; Pipa, Manuel; Neves, Luís C.; Oliveira Santos, LuísThis study focus on the probabilistic modelling of mechanical properties of prestressing strands based on data collected from tensile tests carried out in Laboratório Nacional de Engenharia Civil (LNEC), Portugal, for certification purposes, and covers a period of about 9 years of production. The strands studied were produced by six manufacturers from four countries, namely Portugal, Spain, Italy and Thailand. Variability of the most important mechanical properties is examined and the results are compared with the recommendations of the Probabilistic Model Code, as well as the Eurocodes and earlier studies. The obtained results show a very low variability which, of course, benefits structural safety. Based on those results, probabilistic models for the most important mechanical properties of prestressing strands are proposed.
- Calibration of partial safety factors using FORMPublication . Jacinto, Luciano; Santos, Luís Oliveira; Neves, Luís CanhotoPartial safety factors present in codes are defined for the design of broad populations of structures. As a consequence, they do not always reflect correctly the uncertainties for specific existing structures. The possibility of adjusting them has therefore great interest when assessing an existing structure. The concept of design point connected to FORM offers a simple method to calibrate partial safety factors for individual variables. This paper discusses the overall methodology and develops a set of analytical expressions for the probabilistic models more common in structural reliability. As it will be seen the partial factor for a particular variable can be adjusted once defined: (1) probabilistic model used to describe the uncertainty in that variable; (2) coefficient of variation of the variable; (3) fractile implicit on the characteristic value used to quantify the design value; (4) importance of the variable in the limit state under consideration (measured by the respective sensitivity factor), and (5) target reliability index. The choice of the probabilistic model influences significantly the partial factors and this influence rises as the coefficient of variation increases. As a consequence, more attention must be paid when choosing a probabilistic model for a variable with high coefficient of variation. Os coeficientes parciais de segurança especificados nos regulamentos estão calibrados para o dimensionamento de populações de estruturas relativamente vastas. Consequentemente, tais coeficientes nem sempre refletem corretamente os níveis de incerteza envolvidos em estruturas específicas existentes. A possibilidade de ajustá-los tem, por isso, grande interesse na avaliação de estruturas existentes. O conceito de ponto de dimensionamento FORM oferece um método simples para calibrar coeficientes parciais de segurança relativos a variáveis individuais. Este artigo discute o método geral e desenvolve um conjunto de expressões analíticas para os modelos probabilísticos mais comuns em fiabilidade estrutural. Como veremos, o coeficiente parcial de segurança de uma variável específica pode ser ajustado uma vez definidos: (1) modelo probabilístico usado para descrever a incerteza nessa variável; (2) coeficiente de variação da variável; (3) quantil implícito no valor característico utilizado para quantificar o valor de dimensionamento; (4) importância da variável no estado limite em consideração (medida pelo respetivo coeficiente de sensibilidade) e (5) índice de fiabilidade alvo. A escolha do modelo probabilístico influencia significativamente os coeficientes parciais e essa influência é tanto mais significativa quanto maior for o coeficiente de variação da variável. Consequentemente, mais atenção deve ser dada ao escolher um modelo probabilístico para uma variável com alto coeficiente de variação.