Loading...
11 results
Search Results
Now showing 1 - 10 of 11
- Gold nanoparticles deposited on surface modified carbon xerogels as reusable catalysts for cyclohexane C-H activation in the presence of CO and waterPublication . Ribeiro, Ana Paula da Costa; Martins, Luisa; Carabineiro, Sonia Alexandra Correia; Figueiredo, José; Pombeiro, ArmandoThe use of gold as a promotor of alkane hydrocarboxylation is reported for the first time. Cyclohexane hydrocarboxylation to cyclohexanecarboxylic acid (up to 55% yield) with CO, water, and peroxodisulfate in a water/acetonitrile medium at circa 50 °C has been achieved in the presence of gold nanoparticles deposited by a colloidal method on a carbon xerogel in its original form (CX), after oxidation with HNO3 (-ox), or after oxidation with HNO3 and subsequent treatment with NaOH (-ox-Na). Au/CX-ox-Na behaves as re-usable catalyst maintaining its initial activity and selectivity for at least seven consecutive cycles. Green metric values of atom economy or carbon efficiency also attest to the improvement brought by this novel catalytic system to the hydrocarboxylation of cyclohexane. View Full-Text
- Pyrazole or tris(pyrazolyl)ethanol oxo-vanadium(IV) complexes as homogeneous or supported catalysts for oxidation of cyclohexane under mild conditionsPublication . Silva, Telma F. S.; Mac Leod, Tatiana C. O.; Martins, Luisa; Guedes Da Silva, M. Fátima C.; Schiavon, Marco A.; Pombeiro, ArmandoThe oxovanadium(IV) complexes [VO(acac)(2)(Hpz)].HC(pz)(3) 1.HC(pz)(3) (acac= acetylacetonate, Hpz = pyrazole, pz = pyrazoly1) and [VOCl2{HOCH2C(pz)(3)}] 2 were obtained from reaction of [VO(acac)(2)] with hydrotris(1-pyrazolyl)methane or of VCl(3)with 2,2,2-tris(1-pyrazolyl)ethanol. The compounds were characterized by elemental analysis, IR, Far-IR and EPR spectroscopies, FAB or ESI mass-spectrometry and, for 1, by single crystal X-ray diffraction analysis. 1 and 2 exhibit catalytic activity for the oxidation of cyclohexane to the cyclohexanol and cyclohexanone mixture in homogeneous system (TONS up to 1100) under mild conditions (NCMe, 24h, room temperature) using benzoyl peroxide (BPO), tert-butyl hydroperoxide (TBHP), m-chloroperoxybenzoic acid (mCPBA), hydrogen peroxide or the urea-hydrogen peroxide adduct (UHP) as oxidants. 1 and 2 were also immobilized on a polydimethylsiloxane membrane (1-PDMS or 2-PDMS) and the systems acted as supported catalysts for the cyclohexane oxidation using the above oxidants (TONs up to 620). The best results were obtained with mCPBA or BP0 as oxidant. The effects of various parameters, such as the amount of catalyst, nitric acid, reaction time, type of oxidant and oxidant-to-catalyst molar ratio, were investigated, for both homogeneous and supported systems. (C) 2012 Elsevier B.V. All rights reserved.
- Pyrazole and trispyrazolylmethane rhenium complexes as catalysts for ethane and cyclohexane oxidationsPublication . Alegria, Elisabete; Kirillova, Marina V.; Martins, Luisa; Pombeiro, ArmandoThe pyrazole complexes [ReCl2{N2C(O)Ph}(Hpz)(PPh3)2] 2 (Hpz = pyrazole), [ReCl2{N2C(O)Ph}(Hpz)2(PPh3)] 3 and [ReClF{N2C(O)Ph}(Hpz)2(PPh3)] 4, and the tris(pyrazolyl)methane compounds [ReCl2(HCpz3)(PPh3)][BF4] 5 (pz = pyrazolyl), [ReCl3{HC(pz)3}] 7, [ReOCl2{SO3C(pz)3}(PPh3)] 8 and [ReO3{SO3C(pz)3}] 9, and their precursors [ReCl2{η2-N,O-N2C(O)Ph}(PPh3)2] 1 and [ReOCl3(PPh3)2] 6, act as selective catalysts (or catalyst precursors), in a single-pot process, for the oxidation of ethane, in the presence of potassium peroxodisulfate K2S2O8, in trifluoroacetic acid (TFA), to give acetic acid, in a remarkable yield (up to ca. 40%) and under mild conditions (in some cases carboxylation can also occur to give propionic acid, but in a much lower yield). The catalytic peroxidative oxidation of ethane to acetaldehyde and of cyclohexane to cyclohexanone and cyclohexanol by an aqueous solution of H2O2 at room temperature is also achieved by using most of those catalyst precursors. The effects of a variety of factors were studied towards the optimization of the processes which are shown to proceed via both C-centered and O-centered radical mechanisms.
- Catalytic performance of Fe(II)-scorpionate complexes towards cyclohexane oxidation in organic, ionic liquid and/or supercritical CO2 media: a comparative studyPublication . Da Costa Ribeiro, Ana Paula; Martins, Luisa; Alegria, Elisabete; Matias, Inês A. S.; Duarte, Tiago A. G.; Pombeiro, ArmandoThe catalytic activity of the iron(II) C-scorpionate complexes [FeCl2{HC(pz)3}] 1 (pz = pyrazol-1-yl) and [FeCl2{HOCH2C(pz)3}] 2, and of their precursor FeCl2·2H2O 3, towards cyclohexane oxidation with tert-butyl hydroperoxide was evaluated and compared in different media: acetonitrile, ionic liquids (1-butyl-3-methylimidazolium hexafluorophosphate, [bmim][PF6], and 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate, [bmim][FAP]), supercritical carbon dioxide (scCO2), and scCO2/[bmim][X] (X = PF6 or FAP) mixtures. The use of such alternative solvents led to efficient and selective protocols for the oxidation of cyclohexane. Moreover, tuning the alcohol/ketone selectivity was possible by choosing the suitable solvent.
- New trendy magnetic C-scorpionate iron catalyst and its performance towards cyclohexane oxidationPublication . Da Costa Ribeiro, Ana Paula; Matias, Inês; Alegria, Elisabete; Ferraria, Ana Maria; Rego, Ana; Pombeiro, Armando; Martins, LuisaFor the first time, a magnetic C-scorpionate catalyst was prepared from the iron(II) complex [FeCl2{_3-HC(pz)3}] (pz = pyrazol-1-yl) and ferrite, using the sustainable mechanochemical synthetic procedure. Its catalytic activity for the cyclohexane oxidation with tert-butyl hydroperoxide (TBHP) was evaluated in different conditions, namely under microwave irradiation and under the effect of an external magnetic field. The use of such magnetic conditions significantly shifted the catalyst alcohol/ketone selectivity, thus revealing a promising, easy new protocol for tuning selectivity in important catalytic processes.
- Synthesis and structural characterization of iron complexes with 2,2,2-tris(1-pyrazolyl)ethanol ligands: Application in the peroxidative oxidation of cyclohexane under mild conditionsPublication . Silva, Telma F. S.; Guedes Da Silva, M. Fátima C.; Mishra, Gopal; Martins, Luisa; Pombeiro, ArmandoThe reactions of FeCl2 center dot 2H(2)O and 2,2,2-tris(1-pyrazolyl) ethanol HOCH2C(pz)(3) (1) (pz = pyrazolyl) afford [Fe{HOCH2C(pz)(3)}(2)][FeCl4]Cl (2), [Fe{HOCH2C(pz)(3)}(2)](2)[Fe2OCl6](Cl)(2)center dot 4H(2)O (3 center dot 4H(2)O), [Fe{HOCH2C(pz)(3)}(2)] [FeCl{HOCH2C(pz)(3)}(H2O)(2)](2)(Cl)(4) (4) or [Fe{HOCH2C(pz)(3)}(2)]Cl-2 (5), depending on the experimental conditions. Compounds 1-5 were isolated as air-stable crystalline solids and fully characterized, including (1-4) by single-crystal X-ray diffraction analyses. The latter technique revealed strong intermolecular H-bonds involving the OH group of the scorpionate 2 and 3 giving rise to 1D chains which, in 3, are further expanded to a 2D network with intercalated infinite and almost plane chains of H-interacting water molecules. In 4, intermolecular pi center dot center dot center dot pi interactions involving the pyrazolyl rings are relevant. Complexes 2-5 display a high solubility in water (S-25 degrees C ca. 10-12 mg mL(-1)), a favourable feature towards their application as catalysts (or catalyst precursors) for the peroxidative oxidation of cyclo-hexane to cyclohexanol and cyclohexanone, with aqueous H2O2/MeCN, at room temperature (TON values up to ca. 385). (C) 2011 Elsevier B. V. All rights reserved.
- A bis(mu-chlorido)-bridged cobalt(II) complex with silyl-containing schiff base as a catalyst precursor in the solvent-free oxidation of cyclohexanePublication . Zaltariov, Mirela-Fernanda; Vieru, Veacheslav; Zalibera, Michal; Cazacu, Maria; Martins, Nuno M. R.; Martins, Luisa; Rapta, Peter; NOVITCHI, Ghenadie; Shova, Sergiu; Pombeiro, Armando; Arion, Vladimir B.A new bis(µ-chlorido)-bridged cobalt(II) complex [Co2(µ-Cl)2(HL2)4][CoCl4] (1), where HL2 is a silyl-containing Schiff base, was synthesised. The structure of this compound was established by X-ray crystallography revealing a zwitterionic form adopted by the organic ligand. The temperature dependence of the magnetic susceptibility and the field dependence of the magnetisation indicate the presence of ferromagnetic interactions between paramagnetic d7 cobalt(II) centres (SCo = 3/2). The exchange coupling parameter J(Co1–Co2) = +7.0 cm–1 extracted from broken-symmetry (BS) DFT calculations agrees well with the value of +8.8 cm–1 determined from the experimental data by fitting them with the Hamiltonian math formula. Electrochemical studies indicate that complex 1 is inefficient as a catalyst in electrochemical reduction of protons. One of the reasons is the low stability of the complex in solution. In contrast, 1 acts as an effective homogeneous (pre)catalyst in the microwave-assisted neat oxidation of cyclohexane with aqueous tBuOOH (TBHP). The possible mechanism of catalytic oxidation and other advantages of using 1 in the oxidation of cycloalkanes are discussed.
- Synthesis, characterization and redox behaviour of benzoyldiazenido- and oxorhenium complexes bearing N,N- and S,S-type ligandsPublication . Kirillov, Alexander M.; Guedes Da Silva, M. Fátima C.; Martins, Luisa; Sousa, Catarina; Pombeiro, Armando; Alegria, ElisabeteThe reactions of [ReCl2{eta(2)-N2C(O)Ph}(PPh3)(2)](1) with 2-aminopyrimidine (H(2)Npyrm), 2,2'-bipyridine (bpy) and tetraethylthiuram disulfide (tds), in MeOH upon reflux, lead to the new eta(1)-(benzoyldiazenido)-rhenium(III) complexes [ReCl{eta(1)-N2C(O)Ph}(HNpyrm)(PPh3)(2)](2)and [ReCl2{eta(1)-N2C(O)Ph}(bpy)(PPh3)] (3), and the known oxo(diethyldithiocarbamato)dirhenium(v)complex [Re2O2(mu O){Et2NC(S)S}(4)](4), respectively. The Et2NC(S)S ligands in 4 result from S-S bond rupture of tds molecules. The obtained compounds have been characterized by IR, H-1, P-31{H-1} and C-13{H-1} NMR spectroscopies, FAB(+)-MS, elemental and single-crystal X-ray diffraction (for 2 and 4)analyses. Complex 2 represents the first structurally characterized Re compound derived from 2-aminopyrimidine. Besides, the redox behaviour of 2-4 in CH2Cl2 solution has been studied by cyclic voltammetry, and the Lever electrochemical ligand parameter (E-L)has been estimated, for the first time, for HNpyrm. The electrochemical results are discussed in terms of electronic properties of the Re centres and the ligands.
- Half‐sandwich scorpionate vanadium, iron and copper complexes: synthesis and application in the catalytic peroxidative oxidation of cyclohexane under mild conditionsPublication . Silva, Telma F. S.; Alegria, Elisabete; Martins, Luisa; Pombeiro, ArmandoThe new half‐sandwich scorpionate complexes [hydridotris(1‐pyrazolyl)methane]vanadium trichloride, ([VCl3{HC(pz)3}] 1 (pz=pyrazolyl), [tris(1‐pyrazolyl)methanesulfonate]vanadium trichloride, [VCl3{SO3C(pz)3}] 2 , [hydrido(1‐pyrazolyl)methane]iron dichloride, [FeCl2{HC(pz)3}] 3 , lithium [tris(1‐pyrazolyl)methanesulfonate]dichloroferrate, Li[FeCl2{SO3C(pz)3}] 4 , and [tris(1‐pyrazolyl)methanesulfonate]copper chloride, [CuCl{SO3C(pz)3}] 5 were synthesized, characterized and shown to act, as well as the related (tripyrazolylmethane)copper dichloride, [CuCl2{HC(pz)3}] 6 , as selective catalysts (or catalyst precursors) for the peroxidative oxidation (with hydrogen peroxide) of cyclohexane to cyclohexanol and cyclohexanone, under mild conditions (at room temperature and using an aqueous solution of H2O2). The iron complexes are the most active ones (reaching TON values up to ca. 690), the effects of a variety of factors are reported and the reaction is shown to proceed via both C‐ and O‐centred radical mechanisms, conceivably involving a metal‐based oxidant.
- C-scorpionate iron(II) complexes as highly selective catalysts for the hydrocarboxylation of cyclohexanePublication . Matias, Inês; Da Costa Ribeiro, Ana Paula; Alegria, Elisabete; Pombeiro, Armando; Martins, LuisaThe C-scorpionate iron(II) complexes [FeCl2{kappa(3)-HC(pz)(3)}](1) (pz = pyrazol-1-yl), Li[FeCl2{kappa(3)-SO3C(pz)(3)}] (2) and the new [FeCl2{kappa(3)-HOCH2C(pz)(3)}] (3) act as catalysts for the hydrocarboxylation of cyclohexane (with CO and H2O) to cyclohexanecarboxylic acid in a remarkable yield (up to 60%) and under mild conditions. The catalysts selectivity for the acid can be tuned by CO pressure, catalyst amount and reaction temperature. Complex [FeCl2{kappa(3)-HC(pz)(3)}] (1) provides the most effective catalyst requiring low CO pressure. This work constitutes an unprecedented use of iron complexes as catalysts for the hydrocarboxylation of alkanes.