Browsing by Issue Date, starting with "2018-12-15"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- Dimensionamento das redes de água de segunda intervençãoPublication . Sousa, Ana Margarida Luís de; Henriques, Nuno Paulo Ferreira; Serra, Nuno Ricardo da Piedade AntunesPara o dimensionamento de redes de águas de combate contra incêndios é necessário ter em consideração o Regulamento Técnico de Segurança Contra Incêndio em Edifícios (SCIE), publicado através da Portaria nº 1532/2008, e um conjunto de Despachos publicados pela Associação Nacional de Protecção Civil (ANPC). A referida regulamentação, em particular a Portaria nº 1532/2008, tem levantado dúvidas, na esfera da comunidade técnica, sobre a sua interpretação em alguns aspectos de concepção e dimensionamento das redes de 2ª intervenção. É neste contexto que se realizou uma pesquisa bibliográfica, aprofundou-se o conhecimento da legislação vigente e consultouse a comunidade técnica portuguesa envolvida na concepção, dimensionamento, fornecimento de material e instalação de redes de água de segurança contra incêndios. Foram também consultados os Bombeiros e a Autoridade Nacional de Protecção Civil. Após a realização da análise crítica à informação recolhida, foi possível elaborar um conjunto de sugestões de reformulação à legislação portuguesa vigente, que permitissem dimensionar as redes de 2ª intervenção de forma inequívoca. Em particular, definiram-se critérios que permitissem a selecção de bocas de incêndio armada do tipo teatro (BIATT) comerciais, que cumprissem conjuntamente os parâmetros hidráulicos de dimensionamento e o factor K especificado na norma NP EN 671-2. Neste caso, o factor K é o coeficiente de descarga da BIATT, dado pelo quociente entre o caudal e a raiz quadrada da pressão nessa boca de incêndio. Para exibir as diferenças que resultam da aplicação da regulamentação vigente e da reformulação proposta, efectuou-se o dimensionamento das redes de 2ª intervenção para cinco casos de estudos em edifícios habitacionais (UT I) e edifícios de espectáculos (UT VI). Para avaliar as implicações económicas resultantes da aplicação das sugestões propostas efectuou-se um estudo comparativo, tendo-se concluído que as alterações propostas permitem uma redução 9% a 31% do custo total da rede de águas de 2ª intervenção, consoante o caso de estudo em análise.
- Helium and deuterium irradiation effects in tungsten-based materials with titaniumPublication . Catarino, Norberto; Dias, Marta; Lopes, Jose; Jepu, Ionut; Alves, E.Pure Tungsten (W) will be used as plasma facing component in fusion devices due to its high melting point, good thermal conductivity and low sputtering yield. However, its structural application as plasma facing component (PFC) is still restricted by its low fracture toughness associated with the high ductile to brittle transition temperature (DBTT). In the present study tungsten titanium (W-Ti) samples were produced by Ti implantation at room temperature and 500 °C with a constant fluence of 2 × 1021 at/m2 and an energy of 100 keV. In order to understand the fundamental mechanisms which govern the behavior of defect dynamics in tungsten under reactor conditions, W-Ti materials were implanted at room temperature with 10 keV of He+ with a constant fluence of 5 × 1021 at/m2 and 5 keV of D+ with fluences in the range of 0.1 × 1021–5 × 1021 at/m2. Surface structure and morphology changes were investigated by scanning electron microscopy and X-ray diffraction. Rutherford backscattering spectrometry, nuclear reaction analysis and thermal desorption spectroscopy methods were used to provide information about the distribution of Ti, He and D on W. No changes in the microstructure were observed after Ti implantation in the W plates. NRA analysis showed that D retention in the W-Ti samples is higher after sequential He and D implantation when compared with single D implantation. The diffractogram of W-Ti samples implanted with He evidence a broadening of the W peaks. This effect is believed to be associated with the high volume fraction of the bubbles that may cause internal stress fields inducing extended defects like dislocations which distort the crystal lattice.
- Very high fluence nitrogen implantations in metals studied by Rutherford Backscattering SpectrometryPublication . Cruz, João; Silva, Hugo; Lopes, Jose; Rocha, J.; Pedro De Jesus, AdelaideThis paper reports a study of 14N+ implanted Ti and Zr films analysed by Rutherford Backscattering Spectrometry (RBS). The fluences ranged from 4.0–10.0 × 1017 atoms·cm−2 and energies of 15–20 keV. Here, the nitrogen depth distributions were obtained simultaneously and independently for each RBS spectrum from the direct nitrogen signal and from the reduction of the backscattered yield from Ti and Zr (deficiency method). Fits to the RBS spectra show that the deficiency method clearly underestimates the 14N yield by 32% for Ti (and 45% for Zr) when compared to the direct nitrogen signal. This discrepancy reduces to 23% for Ti (and 43% for Zr) when the presence of nitrogen bubbles are simulated in the fits.