Publication
Evaluation of tool rotational speed effect in Al-16Si-4Cu-10SiC composite/Al-4Cu-Mg alloy joint
| dc.contributor.author | Jamshidi Aval, Hamed | |
| dc.contributor.author | Galvão, Ivan | |
| dc.date.accessioned | 2024-11-11T09:45:57Z | |
| dc.date.available | 2024-11-11T09:45:57Z | |
| dc.date.issued | 2024 | |
| dc.description.abstract | This study investigated the influence of the rotational speed of the tool with a cylindrical threaded pin on the microstructure, mechanical properties and corrosion resistance of the Al-16Si-4Cu-10SiC composite/Al-4Cu-Mg alloy joint. The results show tunnel defects are formed on the advancing side in the heat input less than 121 J/mm and more than 342 J/mm. With the increase of rotational speed from 800 to 1000 rpm, the silicon particle size and the aspect ratio have decreased and increased from 5.6 ±1.2 to 3.5±1.4 µm and 0.6 to 0.8, respectively. By decreasing rotational speed from 1000 to 800 rpm, the maximum hardness (152.3 ±0.6 HV0.1), yield strength (383±6 MPa), ultimate tensile strength (469±9 MPa) and corrosion rate (1.03 mm/year) were achieved. | pt_PT |
| dc.description.version | info:eu-repo/semantics/publishedVersion | pt_PT |
| dc.identifier.citation | Aval HJ, Galvão I. Evaluation of tool rotational speed effect in Al-16Si-4Cu-10SiC composite/Al-4Cu-Mg alloy joint. 2024, https://doi.org/10.1177/02670836241267265 | pt_PT |
| dc.identifier.doi | 10.1177/02670836241267265 | pt_PT |
| dc.identifier.eissn | 1743-2847 | |
| dc.identifier.issn | 0267-0836 | |
| dc.identifier.uri | http://hdl.handle.net/10400.21/17865 | |
| dc.language.iso | eng | pt_PT |
| dc.peerreviewed | yes | pt_PT |
| dc.publisher | Sage Publications Inc. | pt_PT |
| dc.relation.publisherversion | https://journals.sagepub.com/doi/epub/10.1177/02670836241267265 | pt_PT |
| dc.subject | Al-16Si-4Cu-10SiC composite | pt_PT |
| dc.subject | dissimilar friction stir welding | pt_PT |
| dc.subject | Al-4Cu-Mg alloy | pt_PT |
| dc.subject | microstructure | pt_PT |
| dc.subject | corrosion resistance | pt_PT |
| dc.title | Evaluation of tool rotational speed effect in Al-16Si-4Cu-10SiC composite/Al-4Cu-Mg alloy joint | pt_PT |
| dc.type | journal article | |
| dspace.entity.type | Publication | |
| oaire.citation.endPage | 17 | pt_PT |
| oaire.citation.startPage | 1 | pt_PT |
| oaire.citation.title | Materials Science and Technology | pt_PT |
| person.familyName | Jamshidi Aval | |
| person.familyName | Galvão | |
| person.givenName | Hamed | |
| person.givenName | Ivan | |
| person.identifier.ciencia-id | 581F-44DA-F99D | |
| person.identifier.orcid | 0000-0002-5431-0413 | |
| person.identifier.orcid | 0000-0002-2580-7148 | |
| person.identifier.scopus-author-id | 36650802900 | |
| rcaap.rights | closedAccess | pt_PT |
| rcaap.type | article | pt_PT |
| relation.isAuthorOfPublication | e0501d4c-58dd-4a78-9e6e-e961ec8d875f | |
| relation.isAuthorOfPublication | 77ad7655-2d94-49a7-ad9c-d15ba261a88f | |
| relation.isAuthorOfPublication.latestForDiscovery | e0501d4c-58dd-4a78-9e6e-e961ec8d875f |