| Nome: | Descrição: | Tamanho: | Formato: | |
|---|---|---|---|---|
| 448.7 KB | Adobe PDF |
Orientador(es)
Resumo(s)
The large majority of surface plasmon resonance based devices use noble metals, namely gold or silver, in their manufacturing process. These metals present low resistivity, which leads to low optical losses in the visible and near infrared spectrum ranges. Gold shows high environmental stability, which is essential for long-term operation, and silver's lower stability can be overcome through the deposition of an alumina layer, for instance. However, their high cost is a limiting factor if the intended target is large scale manufacturing.
In this work, it is considered a cost-effective approach through the selection of aluminum as the plasmonic material and hydrogenated amorphous silicon instead of its crystalline counterpart. This surface plasmon resonance device relies on Fano resonance to improve its response to refractive index deviations of the surrounding environment. Fano resonance is highly sensitive to slight changes of the medium, hence the reason we incorporated this interference phenomenon in the proposed device.
We report the results obtained when conducting Finite-Difference Time Domain algorithm based simulations on this metal-dielectric-metal structure when the active metal is aluminum, gold and silver. Then, we evaluate their sensitivity, detection accuracy and resolution, and the obtained results for our proposed device show good linearity and similar parameter performance as the ones obtained when using gold or silver as plasmonic materials.
Descrição
Este trabalho foi financiado pelo Concurso Anual para Projetos de Investigação, Desenvolvimento, Inovação e Criação Artística (IDI&CA) 2017 do Instituto Politécnico de Lisboa. Código de referência IPL/2017/EmGraph/ISEL
Este trabalho foi financiado pelo Concurso Anual para Projetos de Investigação, Desenvolvimento, Inovação e Criação Artística (IDI&CA) 2016 do Instituto Politécnico de Lisboa. Código de referência IPL/2016/EXOWAVE_ISEL
Este trabalho foi financiado pelo Concurso Anual para Projetos de Investigação, Desenvolvimento, Inovação e Criação Artística (IDI&CA) 2016 do Instituto Politécnico de Lisboa. Código de referência IPL/2016/EXOWAVE_ISEL
Palavras-chave
Photonics FDTD simulations Surface plasmon resonance Fano interference
Contexto Educativo
Citação
LOURENÇO, Paulo; [et al] – FDTD analysis of Aluminum/a-Si:H surface plasmon waveguides. In Proceedings of SPIE – Physics and Simulation of Optoelectronic Devices XXVI. San Francisco, California, EUA: SPIE, 2018. ISSN 0277-786X. Vol. 10526, pp. 105262D-1- 105262D-7
Editora
Society of Photo-optical Instrumentation Engineers