Loading...
4 results
Search Results
Now showing 1 - 4 of 4
- Experimental investigation on the variability of the main mechanical properties of concrete produced with coarse recycled concrete aggregatesPublication . Pacheco, João; De Brito, Jorge; Chastre, Carlos; Evangelista, LuisResearch on the variability of the properties of recycled aggregate concrete is lacking and is necessary for the development of reliability analyses and code calibration procedures. This paper presents an experimental programme on the within-batch variability of the compressive strength, Young's modulus, and splitting tensile strength of several recycled and natural aggregate concrete mixes. The influence of the recycled concrete aggregates on the mechanical properties and variability of concrete is analysed and discussed and benchmarks with standard predictions for the variability of natural aggregate concrete are made. It was found that full recycled aggregate concrete incorporation did not increase the variability of any of the properties tested, but intermediate ratios of recycled aggregate incorporation did. The properties of high-strength concrete mixes were more variable than that of all other mixes, irrespective of recycled aggregate incorporation. All properties of all compositions were suitably modelled by normal distributions. The coarse recycled aggregates were sourced from concrete waste.
- Eurocode shear design of coarse recycled aggregate concrete: reliability analysis and partial factor calibrationPublication . Pacheco, João; Brito, Jorge de; Chastre, Carlos; Evangelista, LuisThis paper contributes to the definition of design clauses for coarse recycled aggregate concrete. One of the main reasons for scepticism towards recycled aggregate concrete is the perceived notion that the heterogeneity of recycled aggregates may increase the uncertainty of the behaviour of concrete. Therefore, the paper uses structural reliability concepts to propose partial factors for recycled aggregate concrete's design for shear failure. The paper builds upon a previous publication by the authors, in which the model uncertainty of recycled aggregate concrete elements designed for shear, with and without shear reinforcement, was compared with that of natural aggregate concrete elements. In that paper, the statistics of the model uncertainty for recycled aggregate concrete shear design were indeed found to be less favourable than those of natural aggregate concrete. Therefore, a partial factor for recycled aggregate concrete design is needed to ensure safety. This paper presents partial factors calibrated with explicit reliability analyses for different cases of design concerning beams (in the case of shear design of elements with shear reinforcement) and slabs (for the design of elements without shear reinforcement). For full incorporation of coarse recycled concrete aggregates and the design of elements without shear reinforcement, the calibrated partial factor reduces the design value of shear resistance by 10% (design with EN1992) or 15% (design with prEN1992) in comparison to natural aggregate concrete's design. For the shear design of elements with shear reinforcement, the partial factor decreases resistance by 5% but a sensitivity analysis showed that the reduction might be, under pessimistic expectations, of up to 20%.
- Bond of recycled coarse aggregate concrete: model uncertainty and reliability-based calibration of design equationsPublication . Pacheco, João; Brito, Jorge de; Chastre, Carlos; Evangelista, LuisThis paper concerns the design of lap splice lengths for ribbed steel reinforcement bars embedded in concrete produced with coarse recycled concrete aggregates. Recycled aggregates are weaker and typically lead to concrete with lower tensile strength. Both aspects change the model uncertainty of bond strength formulae and a major topic of the paper is the influence of recycled aggregates on the model uncertainty of the bond strength model of fib Bulletin 72. A stochastic model for this model uncertainty is developed from a meta-analysis. The model uncertainty, estimated from analogue specimens made with either natural aggregate concrete or recycled aggregate concrete, is compared and the incorporation of recycled aggregates was indeed found to have a detrimental influence on the model uncertainty. A partial factor for lap splice length design is calibrated through reliability analyses so that the probability of failure of the bond length design of recycled aggregate concrete is equivalent to that of natural aggregate concrete. Two design equations were studied: that of the fib Bulletin 72 and that of the D6 draft of the second generation of Eurocode 2.
- Uncertainty of shear resistance models: Influence of recycled concrete aggregate on beams with and without shear reinforcementPublication . Pacheco, João; De Brito, Jorge; Chastre, Carlos; Evangelista, LuisThe model uncertainty of the shear resistance equations of three design codes {the current Eurocode 2 (2004), Model Code (2010), and the final draft of the Eurocode 2 (2020)} was investigated for coarse natural and recycled aggregate concrete beams. Databases of beams with and without shear reinforcement were made with clearly defined criteria. The statistics of the model uncertainty of natural and recycled concrete beams were compared and it was found that recycled aggregate incorporation has detrimental effects on the model uncertainty of shear design. Surprisingly, recycled concrete aggregate beams designed following the current version of Eurocode 2 (2004) are safer than those designed using the other codes. This is due to the shear resistance equations of the latter overestimating the aggregate interlock of recycled aggregate. A preliminary partial factor was proposed, offsetting the influence of recycled aggregate on the safety of beam designs. The database of beams with shear reinforcement lacks representativeness but hinted that recycled aggregate incorporation also reduces the safety of this type of shear design. The paper finishes presenting suggestions of experiments that would complement the current knowledge on this topic.