Loading...
86 results
Search Results
Now showing 1 - 10 of 86
- Analysis of metallic nanoparticles embedded in thin film semiconductors for optoelectronic applicationsPublication . Fantoni, Alessandro; Fernandes, Miguel; Vygranenko, Yuri; Louro, Paula; Vieira, Manuela; Silva, R. P. O.; Teixeira, D.; Da Costa Ribeiro, Ana Paula; Prazeres, Duarte; Alegria, ElisabeteThis paper reports about a study of the local plasmonic resonance (LSPR) produced by metal nanoparticles embedded in a dielectric or semiconductor matrix. It is presented an analysis of the LSPR for different nanoparticle metals, shapes, and embedding media composition. Metals of interest for nanoparticle composition are Aluminum and Gold. Shapes of interest are nanospheres and nanotriangles. We study in this work the optical properties of metal nanoparticles diluted in water or embedded in amorphous silicon, ITO and ZnO as a function of size, aspect-ratio and metal type. Following the analysis based on the exact solution of the Mie theory and DDSCAT numerical simulations, it is presented a comparison with experimental measurements realized with arrays of metal nanospheres. Simulations are also compared with the LSPR produced by gold nanotriangles (Au NTs) that were chemically produced and characterized by microscope and optical measurements.
- Performance of an a-Si:H MMI multichannel beam splitter analyzed by computer simulationPublication . Costa, João; Almeida, Daniel; Fantoni, Alessandro; Lourenço, Paulo; Fernandes, Miguel; Vieira, ManuelaOptical power splitters are widely used in many applications and di_erent typologies have been developed for devices dedicated to this function. Among them, the multimode interference design is especially attractive for its simplicity and performance making it a strong candidate for low-cost applications, such as photonics lab-on-chips for biomedical point of care systems. Within this context, splitting the optical beam equally into multiple channels is of fundamental importance to provide reference arms, parallel sensing of di_erent biomarkers and allowing multiplexed reading schemes. From a theoretical point of view, the multimode structure allows implementation of the power splitting function for an arbitrary number of channels, but in practice its performance is limited by lithographic mask imperfections and waveguide width. In this work we analyze multimode waveguide structures, based on amorphous silicon (a-Si:H) over insulator (SiO2), which can be produced by the PECVD deposition technique. The study compares the performance of several 1 to N designs optimized to provide division of the fundamental quasi-TM mode as a function of input polarization and lithographic roughness. The performance is analyzed in terms of output power uniformity and attenuation and is based on numerical simulations using the Beam Propagation Method and Eigenmode Expansion Propagation Methods.
- SiC multilayer photonic structures with self optical bias amplificationPublication . Vieira, Manuela; Vieira, Manuel Augusto; Louro, Paula; Fantoni, Alessandro; Barata, Manuel; Vaz da Silva, VCharacteristics of tunable wavelength pi'n/pin filters based on a-SiC:H multilayered stacked cells are studied both experimental and theoretically. Results show that the device combines the demultiplexing operation with the simultaneous photodetection and self amplification of the signal. An algorithm to decode the multiplex signal is established. A capacitive active band-pass filter model is presented and supported by an electrical simulation of the state variable filter circuit. Experimental and simulated results show that the device acts as a state variable filter. It combines the properties of active high-pass and low-pass filter sections into a capacitive active band-pass filter using a changing photo capacitance to control the power delivered to the load.
- Simulation of a parallel waveguide array structure suitable for interrogation scheme in a plasmonic biossensorPublication . Costa, João; Fantoni, Alessandro; Lourenço, Paulo; Vieira, ManuelaSurface plasmon resonance sensors have emerged has one of the most suitable approaches for biosensing. A common approach consists of exciting the plasmons at the interface between a functionalized metal film and a sample medium containing the analyte. The propagation of the surface plasmon is highly dependent on changes of the refractive index of the surrounding environment thus providing a mechanism for sensing. The typical interrogation schemes are based on scanning over the wavelength or the incident angle to search for the resonance condition. These solutions require additional motor-driven rotation stages, prisms or other bulky components, introducing complexity which prevents the fabrication of fully on-chip devices. This work reports a simulation study of an amorphous silicon waveguide structure consisting of an array of parallel surface plasmon interferometers with different propagation lengths, each one comprising a thin layer of gold embedded into a-Si:H waveguide. The surface plasmon modes at the end of the plasmonic structure can interfere constructively or destructively depending on the refractive index of the analyte and the interferometer’s length. The variation of the output intensity at the end of each element of the array provides a convenient interrogation scheme that is suitable for on-chip integration. In this paper we investigate this setup and analyze the output power at the end of the array as a function of the refractive index of the sampling medium. The setup is simulated and characterized by the eigenmode expansion method.
- Optimisation of a plasmonic parallel waveguide sensor based on amorphous silicon compoundsPublication . Costa, João; Fantoni, Alessandro; Lourenço, Paulo; Vieira, ManuelaThis work reports the simulation of a plasmonic waveguide sensor working in the visible range based on amorphous silicon compounds. Typical plasmonic sensor interrogation schemes are based on scanning over the wavelength or the incident angle to search for the resonance condition. These solutions usually require expensive or bulky components, such as prisms, motor-driven rotation stages or tunable lasers. In this work we propose an amorphous silicon nitride waveguide structure consisting of an array of parallel surface plasmon interferometers of different lengths, each one comprising a thin layer of aluminium embedded into the waveguide. Using modal decomposition simulations, we show that the variation of the output power at the end of each waveguide array element provides a convenient interrogation scheme. By exploring amorphous silicon compounds that can be deposited by Pressure Enhanced Chemical Vapor Deposition (PECVD) at low temperatures, we aim to achieve a low-cost fabrication process that is compatible with backend CMOS processing and wavelengths in the visible range.
- Indoor positioning and intuitive advertising using visible light communicationPublication . Vieira, Manuela; Vieira, Manuel; Louro, Paula; Fantoni, Alessandro; Vieira, PedroThis paper researches the applicability of an intuitive advertising system for large indoor environments using Visible Light Communication (VLC). This VLC based positioning system includes the use of the visible light signal to light the space and to transmit the information for travelers’ positioning and of advertising campaigns in the surroundings. White RGB-LEDs, whose original function is providing illumination, are used as transmitters due to the ability of each individual chip to switch quickly enough to transfer data. This functionality is used for communication where the multiplexed data can be encoded in the emitting light. The light signals emitted by the LEDs positioned in the area of the advertising campaign are interpreted directly by the customers’ receivers. A SiC optical sensor with light filtering and demultiplexing properties receives the modulated signals containing the ID and the geographical position of the LED and other information, demultiplexes and decodes the data and locates the mobile device in the environment. Different layouts are analysed: square and hexagonal meshes are tested, and a 2D localization design, demonstrated by a prototype implementation, is presented. The key differences between both topologies are discussed. For both, the transmitted information, indoor position and motion direction of the customer are determined. The results showed that the LED-aided VLC navigation system enables to determine the position of a mobile target inside the network, to infer the travel direction as a function of time and to interact with information received.
- Stacked photo-sensing devices based on SiC alloys A non-pixelled architecture for imagers and demultiplexing devicesPublication . Vieira, Manuela; Louro, Paula; Fernandes, Miguel; Fantoni, Alessandro; Vieira, Manuel Augusto; Costa, JoãoIn this review paper different designs based on stacked p-i'-n-p-i-n heterojunctions are presented and compared with the single p-i-n sensing structures. The imagers utilise self-field induced depletion layers for light detection and a modulated laser beam for sequential readout. The effect of the sensing element structure, cell configurations (single or tandem), and light source properties (intensity and wavelength) are correlated with the sensor output characteristics (light-to-dark sensivity, spatial resolution, linearity and S/N ratio). The readout frequency is optimized showing that scans speeds up to 104 lines per second can be achieved without degradation in the resolution. Multilayered p-i'-n-p-i-n heterostructures can also be used as wavelength-division multiplexing /demultiplexing devices in the visible range. Here the sensor element faces the modulated light from different input colour channels, each one with a specific wavelength and bit rate. By reading out the photocurrent at appropriated applied bias, the information is multiplexed or demultiplexed and can be transmitted or recovered again. Electrical models are present to support the sensing methodologies.
- Tuning the spectral distribution of p-i-n a-SiC : H devices for colour detectionPublication . Vieira, Manuela; Louro, Paula; Fantoni, Alessandro; Fernandes, MiguelZnO:Al/p (SiC:H)/i (Si:H)/n (SiC:H) large area image and colour sensor are analysed. Carrier transport and collection efficiency are investigated from dark and illuminated current-voltage (I-V) dependence and spectral response measurements under different optical and electrical bias conditions. Results show that the carrier collection depends on the optical bias and on the applied voltage. By changing the electrical bias around the open circuit voltage it is possible to filter the absorption at a given wavelength and so to tune the spectral sensitivity of the device. Transport and optical modelling give insight into the internal physical process and explain the bias control of the spectral response and the image and colour sensing properties of the devices.
- Surface plasmon resonance sensing structurePublication . Lourenço, Paulo; Fantoni, Alessandro; Louro, Paula; Costa, João; Vieira, ManuelaSurface Plasmon Resonance occurs when a polarized electromagnetic field strikes a metallic surface at the separation interface between metal and an insulator. This phenomenon is characterized by the conduction electrons resonant oscillation at the interface, resulting on propagating plasmon waves on the metallic surface. Since this wave is generated at the boundary between the metallic surface and the external medium, these structures are highly sensitive to alterations on the surrounding environment, namely the refractive index, and may be used in sensing structures. The large majority of these devices use noble metals, namely gold or silver, as the active material. These metals present low resistivity, which leads to low optical losses in the visible and near infrared spectrum ranges. Gold shows high environmental stability, which is essential for long-term operation, and silver’s lower stability can be overcome through the deposition of an alumina layer. However, their high cost is a limiting factor if the intended target is large scale manufacturing. In this work, we performed Finite Differences Time Domain simulations on a Surface Plasmon Resonance based sensing structure, considering cost-effective materials such as aluminium for the active metal and hydrogenated amorphous silicon for the waveguide supporting elements, and verified that these structures are able to detect refractive index variations of the surrounding environment at the 1550 µm operating wavelength. This sensing architecture has also been modelled with dispersive materials, losses included, to reflect as much as possible physical reality, revealing good performance capabilities when compared to similar noble metals based devices.
- Detection of Change in Fluorescence Between Reactive Cyan and the Yellow Fluorophores Usinga-SiC:H Multilayer TransducersPublication . Vieira, Manuela; Costa, João; Louro, Paula; Fernandes, Miguel; Fantoni, AlessandroOptical colour sensors based on multilayered a-SiC:H heterostructures can act as voltage controlled optical filters in the visible range. In this article we investigate the application of these structures for Fluorescence Resonance Energy Transfer (FRET) detection, The characteristics of a-SiC:H multilayered structure are studied both theoretically and experimentally in several wavelengths corresponding to different fluorophores. The tunable optical p-i'(a-SiC:H)-n/p-i(a-Si:H)-n heterostructures were produced by PECVD and tested for a proper fine tuning in the violet, cyan and yellow wavelengths. The devices were characterized through transmittance and spectral response measurements, under different electrical bias and frequencies. Violet, cyan and yellow signals were applied in simultaneous and results have shown that they can be recovered under suitable applied bias. A theoretical analysis supported by numerical simulation is presented.