Loading...
12 results
Search Results
Now showing 1 - 10 of 12
- Cooperative vehicular systems: crossroad management through visible lightPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroInformation and communication technologies enable optoelectronic cooperative vehicular systems with bi-directional communication, where vehicles communicate with other vehicles, road infrastructures, traffic lights, and vulnerable road users. We use the concept of request/response for the management of a trajectory in a two-way-two-way traffic lights controlled crossroad, using visible-light communication (VLC). The connected vehicles receive information from the network (Infrastructure to Vehicle, I2V), interact with each other (Vehicle to Vehicle, V2V) and with the infrastructure (Vehicle to Infrastructure, V2I), using a request distance and pose estimation concept. In parallel, an intersection manager (IM) coordinates the crossroad and interacts with the vehicles (I2V) using the response distance and the pose estimation concepts. The communication is performed through VLC using the street lamps and the traffic signaling, to broadcast the information. Data are encoded, modulated, and converted into light signals emitted by the transmitters. Tetra-chromatic white sources are used, providing a different data channel for each chip. As receivers and decoders, SiC wavelength division multiplexer (WDM) devices, with light filtering properties, are considered. A simulated vehicle-to-everything (V2X) traffic scenario is presented, and a generic model of cooperative transmission is established. The primary objective is to control the arrival of vehicles to the intersection and schedule them to cross over at time instants that minimize delays. A phasing traffic flow is developed as a proof of concept (PoC). The simulated/experimental results confirm the cooperative VLC architecture. Results show that the communication between connected cars is optimized using a request/response concept and that pose analysis is an important issue to control driver’s behavior in a crossroad. The block diagram conveys that the vehicle’s behavior (successive poses) is influenced by the maneuver permission, by the I2V messages and also by the intersection redesigned layout and presence of other vehicles. An increase in the traffic throughput with least dependency on infrastructure is achieved.
- Cooperative vehicular visible light communication in smarter split intersectionsPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroThis paper addresses the issues related to the Visible Light Communication (VLC) usage in vehicular communication applications. We propose a Visible Light Communication system based on Vehicle-to-Vehicle, Vehicle-to-Infrastructure and Infrastructure-to-Vehicle communications able to safely manage vehicles crossing through an intersection leveraging Edge of Things facilities. By using the streetlamps, street lights and traffic signaling to broadcast information, the connected vehicles interact with one another and with the infrastructure. By using joint transmission, mobile optical receivers collect data at high frame rates, calculate their location for positioning and, concomitantly, read the transmitted data from each transmitter. In parallel with this, an intersection manager coordinates traffic flow and interacts with the vehicles via Driver Agents embedded in them. A communication scenario is stablished and a “mesh/cellular” hybrid network configuration proposed. Data is encoded, modulated and converted into light signals emitted by the transmitters. As receivers and decoders, optical sensors with light filtering properties, are used. Bidirectional communication between the infrastructure and the vehicles is tested. To command the passage of vehicles crossing the intersection safely queue/request/response mechanisms and temporal/space relative pose concepts are used. Results show that the short range mesh network ensures a secure communication from street lamp controllers to the edge computer through the neighbor traffic light controller with active cellular connection and enables peer-to-peer communication, to exchange information between V-VLC ready connected cars. The innovative treatments for the congested intersections are related with the introduction of the split intersection. In the split intersection a congested two-way-two-way traffic light controlled intersection was transformed into two lighter intersections which facilitate a smoother flow with less driver delay by reducing the number of vehicle signal phases. Based on the results, the V-VLC system provides direct monitoring of critical points including queue formation and dissipation, relative speed thresholds and inter-vehicle spacing, increasing safety.
- Redesign of the trajectory within a complex intersection for visible light communication ready connected carsPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroTo serve the changing needs of road traffic control, the road space and road structure surrounding an intersection have evolved into complex forms. The redesign of the trajectories, though complex, can be accomplished by the application of methods for navigation, guidance, and combination of expert knowledge of road traffic control of vehicles, using a concept of request/response in a two-way-to-way traffic light-controlled crossroad. The communication between the infrastructures and the vehicles (I2V), between vehicles (V2V), and from the vehicles to the infrastructures (V2I) is performed through visible light communication (VLC) using the street lamps and the traffic signaling to broadcast the information. Vehicle headlamps and taillights are used to transmit data to other vehicles or infrastructures allowing digital safety and data privacy. Data are encoded, modulated, and converted into light signals emitted by the transmitters. Tetra-chromatic white sources are used providing a different data channel for each chip. As receivers and decoders, silicon/carbon wavelength division multiplexer devices, with light filtering properties, are used. The primary objective is to control the arrival of vehicles to an intersection and schedule them to cross at times that minimize delays. A further objective is to allocate delays between left-turns and forward movements, moderating the speed and slot between vehicles traveling in these directions, maintaining a safe distance from one to another. Pedestrians and bicycles are incorporated. A I2V2V2I traffic scenario is established. A phasing traffic flow is developed as a proof of concept. The experimental results confirm the cooperative VLC architecture showing that communication between connected cars is optimized.
- Trajectory redesign within a complex intersection for VLC ready connected carsPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroIn order to serve the changing needs of road traffic control, the road space and road structure surrounding an intersection have evolved into complex forms. Using a new concept of request/response in a two-way-to-way traffic light controlled crossroad, the redesign of the trajectories can be accomplished by the application of methods for navigation, guidance and combination of expert knowledge of vehicle road traffic control. In this work, the communication between the Infrastructures and the Vehicles (I2V), between vehicles (V2V) and from the Vehicles to the Infrastructures (V2I) is performed through Visible Light Communication (VLC), using the street lamps and the traffic signaling to broadcast the information. Vehicle headlamps are used to transmit data to other vehicles or infrastructures, allowing digital safety and data privacy. Data is encoded, modulated and converted into light signals emitted by the transmitters. Tetra-chromatic white sources are used, providing a different data channel for each chip. As receivers and decoders, SiC Wavelength Division Multiplexer (WDM) devices, with light filtering properties, are considered. The primary objective is to control the arrival of vehicles to an intersection and schedule them to cross at times that minimize traffic delay. A further objective is to allocate delays between left-turns and forward movements, moderating the speed and slot between vehicles travelling in these directions, maintaining a safe distance from one to another. Pedestrians and bicycles are also incorporated. An I2V2V2I traffic scenario is proposed, and bidirectional communication between the infrastructure and the vehicles is tested, using the VLC request/response concept. A phasing traffic flow is developed as a proof of concept. The experimental results confirm the cooperative VLC architecture, showing that communication between connected cars and infrastructures can be optimized using the mentioned request/response concept. A significant increase in traffic throughput with the least dependency on infrastructure is achieved.
- Bidirectional data transfer in VLC linksPublication . Louro, Paula; Vieira, Manuela; Vieira, Manuel AugustoVisible Light communication is a data transmission technology that uses the LED lighting infrastructure to simultaneously illuminate and communicate. The ubiquitous existence of LED lamps opened a new opportunity for addressing VLC communication in many indoor communication scenarios. The motivation for the application presented in this paper is the modern, efficient management of warehouses supported by autonomous navigation robots that grab goods and deliver the items at the packaging station. This functionality demands bi-directional communication among infrastructures and vehicles. In this paper we propose links for Infrastructure-To-Vehicle (I2V), Vehicle-ToInfrastructure (V2I) and Vehicle-To-Vehicle (V2V) to perform indoors, bi-directional communication for robot navigation in automated warehouses. In this work it is proposed a bidirectional communication system between a static infrastructure and a mobile robot (I2V). The LED lamps of the warehouse illumination system are used to lighten the space, and to transmit information about position and about racks content. The mobile robots communicate with the infrastructure (V2I) to transmit information on the items that are being removed and carried to the packaging station. The communication among the autonomous robots (V2V) provides information on the number of items intended to be collected when the vehicles are in the same lane, possibly with the purpose of collecting the same items. Different codification schemes are proposed to establish the V2I, I2V and V2V links. Tri-chromatic white LEDs with the red and blue chips modulated at different frequencies and a photodetector based on a-SiC:H/a-Si:H with selective spectral sensitivity are used at the emitter and receiver. Position information is provided by each LED lamp to the autonomous vehicle by adequate modulation of the RGB emitters. The decoding strategy is based on accurate calibration of the output signal. Different scenarios were designed and tested. Requirements related to synchronous transmission and flickering were addressed to enhance the system performance.
- VLC ready connected cars: trajectory redesign inside an intersectionPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroThe redesign of the trajectories though complex, can be accomplished by the application of methods for navigation, guidance and combination of knowledge of road traffic control of vehicles. In this work the communication between the infrastructures and the vehicles, between vehicles and from the vehicles to the infrastructures is performed through Visible Light Communication (VLC) using the street lamps and the traffic signaling to broadcast the information. Vehicle headlamps and taillights are used to transmit data to other vehicles or infrastructures allowing digital safety and data privacy. Data is encoded, modulated and converted into light signals emitted by the transmitters. Tetra-chromatic white sources are used providing a different data channel for each chip. As receivers and decoders, SiC Wavelength Division Multiplexer (WDM) devices, with light filtering properties, are used. The primary objective is to control the arrival of vehicles to an intersection and schedule them to cross at times that minimize delays. A further objective is to allocate delays between left-turns and forward movements, moderating the speed and slot between vehicles travelling in these directions, maintaining a safe distance from one to another. Pedestrians and bicycles are incorporated. A Vehicleto-Everything (V2X) traffic scenario is stablished and bidirectional communication between the infrastructure and the vehicles is tested, using the VLC request/response concept. A phasing traffic flow is developed as a proof of concept. The experimental results confirm the cooperative VLC architecture showing that communication between connected cars is optimized using a request/response concept. An increase in the traffic throughput with least dependency on infrastructure is achieved.
- Management of split intersections using vehicular visible light communicationPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroVehicle Communication Systems consist of vehicles and roadside units that communicate with one another in order to exchange information, such as traffic information and safety warnings. Split intersections are an innovative solution for congested urban areas. In this case, a congested two-way-two-way intersection is made into two lighter intersections. It facilitates a smoother flow with less driver delay, by reducing the number of conflict points and improving the travel time. Based on Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) and Infrastructure-to-Vehicle (I2V) communications, we propose a Visible Light Communication system that can safely manage vehicles crossing an intersection using Edge of Things facilities. The connected vehicles communicate with each other and with the infrastructure through visible light, by using headlights, street lamps, and traffic signals, In parallel, an intersection manager coordinates the traffic flow and interacts with the vehicles through internally installed Driver Agents. Request/response mechanisms and time/space relative pose concepts are used to control the flow of vehicles safely crossing the intersection. A communication scenario is established, and a “mesh/cellular” hybrid network configuration is proposed. Data is encoded, modulated and converted into light signals emitted by the transmitters. As receivers and decoders, optical sensors with light filtering properties, are used. Bidirectional communication between the infrastructure and the vehicles is tested, using the VLC request/response concept. Results show that the short-range mesh network ensures a secure communication from street lamp controllers to the edge computer through the neighbor traffic light controller with active cellular connection and enables peer-to-peer communication, to exchange information between V-VLC ready connected cars.
- Indoors geolocation based on visible light communicationPublication . Louro, Paula; Vieira, Manuela; Vieira, Manuel AugustoThis paper presents the use of a selective device based on a-SiC:H/a-Si:H for the photodetection of visible signals emitted by red, green and blue emitters in a Visible Light Communication (VLC) system. The VLC system employs RGB white LEDs to provide both illumination and information transmission. The acquisition and processing of the measured photocurrent allows the identification of the induced optical excitation, which encodes the spatial position. The system is designed so that the detector’s s spatial location can be obtained based on the identification of the received optical signals. The methodology used for the photocurrent signal processing involves Fourier transform analysis for frequency identification and the use of a photodetector with spectral selective properties of wavelength identification. A full characterization of the photodetector is presented together with the physical operation that plays the key role in the detection of the output photocurrent.
- Vehicular Visible Light Communication – I2V2V2I connected carsPublication . Vieira, Manuel Augusto; Vieira, Manuela; Louro, Paula; Vieira, PedroThis paper investigates the connected vehicle concept at intersections with traffic signals control and proposes the use of Visible Light Communication (VLC) in Vehicular Communication Systems for vehicle safety applications. A smart vehicle lighting system that combines the functions of illumination, signaling, communications, and positioning is presented. A generic model of cooperative transmissions for vehicular communications services is established. Three specific vehicular communications systems are analyzed. One is for Infrastructure-to-Vehicle communications from the street lamps, located on roadside, to the vehicles; the other is for in line Vehicle-to-Vehicle communications and the last for Vehicle-to-Infrastructure communications from cars to the traffic lights, at the crossroad. An on-off code is used to transmit data. The encoded message contains the ID code of each emitter concomitantly with a traffic message that is received, decoded and resent to another vehicle or to traffic light, in the crossroad. An algorithm to decode the information is established. A phasing traffic flow is presented as a proof of concept.
- Optical link for bidirectional communication based on visible lightPublication . Louro, Paula; Vieira, Manuela; Vieira, Manuel AugustoVisible Light Communication (VLC) is currently a research topic under severe development due to the possibility to provide high data rates and handle the general, worldwide demanding need for climbing bandwidth. VLC uses Light Emitting Diodes (LED), operating in the visible part of the electromagnetic spectrum, as optical sources for optical wireless communication. The technology provides dual functions of lighting and communication. Its main advantages are related to high data rates, higher bandwidth, reliability and a secure data transmission compared to other wireless technologies (such as Wi-Fi). This paper explores the use of VLC to establish different optical communication links for bidirectional communication between vehicles and infrastructures, using 3 links, namely Infrastructure-To-Vehicle (I2V), Vehicle-To-Infrastructure and (V2I) communication. The proposed application uses VLC to support autonomous navigation of mobile robots inside a modern, automated warehouse, providing navigation and stock management services. Specific coding schemes are used in each optical link using On-OFF keying modulation. In the I2V link RGB white LEDs are used to allow simultaneous modulation of the emitters embedded in each LED, which enables wavelength division multiplexing of the transmitted optical signals. The detection is based on a based a-SiC:H pin-pin photodetector with tunable sensitivity in the visible range. Different indoors communication scenarios are presented and the system performance on bit error rate is discussed using a bit parity error control methodology. Requirements related to synchronous transmission and flicker mitigation were addressed to enhance the system performance.