Loading...
2 results
Search Results
Now showing 1 - 2 of 2
- Supercritical CO2 extraction of spent coffee grounds. Influence of co-solvents and characterization of the extractsPublication . Coelho, Jose; Filipe, Rui; Robalo, M. Paula; Boyadzhieva, Stanislava; Cholakov, Georgi; Stateva, RoumianaSpent coffee grounds (SCGs) were extracted with supercritical CO2 at temperatures of 313 K and 333 K, pressures up to 50.0 MPa and different scCO(2) flow rates. The addition of co-solvents isopropanol, ethanol and ethyl lactate decreased the time to achieve the maximum oil yield, to half of that with pure CO2. Analysis of the extracted oils by NMR, showed that caffeine content was (0.56-3.96) % and DUFA and MUFA contents changed within (39.8-42.0) % and (12.9-15.8) %, respectively. The analyses of fatty acids performed by GC-FID revealed the composition of the oils being 76 % of the total constituted by palmitic and linoleic esters. The DPPH antioxidant capacity was improved up to 12.5 times with co-solvents. The kinetics of oil extraction from SCGs with pure scCO(2) was modeled successfully by combining for the first time representation of the oil mixture by a single virtual molecule with group contribution methods.
- Application of a novel approach to modelling the supercritical extraction kinetics of oil from two sets of chia seedsPublication . Villanueva Bermejo, David; Fornari, Tiziana; Calvo, Maria V.; FONTECHA, JAVIER; Coelho, Jose; Filipe, Rui; Stateva, Roumiana P.The kinetics of the supercritical fluid extraction of edible and discarded chia seeds was studied and modelled for the first time. The total oil was removed at 45 MPa and 60 degrees C after 240 min. The extraction kinetics was simulated using a dynamic model in gPROMS ModelBuilder environment and the kinetic parameters estimated. Triolein was chosen as a model compound of the chia oil. The agreement between the experimental yields and those calculated by the model was good with deviations in the range (1.2-6.6) %, except at 25 MPa and 60 degrees C (AARD = 9.5%). (C) 2019 The Korean Society of Industrial and Engineering Chemistry.