Browsing by Author "Cristino, Valentino A. M."
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- Groove stiffening of sheets by single point incremental formingPublication . Cristino, Valentino A. M.; Pragana, João P. M.; Bragança, Ivo; Silva, Carlos M. A.; Martins, PauloThis paper investigates the applicability of single point incremental forming to fabricate stiffening grooves in thin metallic panels. The work combines experimentation, finite element and analytical modelling to determine the required forces and the maximum allowable groove depths that can be produced without tearing. The analytical modelling is based on a framework that was previously developed by the authors and combines in-plane membrane stretching and fracture forming limits. Comparison of the results obtained by the analytical framework against experimental and finite element data proves its effectiveness to replicate the deformation mechanics of groove stiffening by single point incremental forming. Results also prove that groove stiffening by single point incremental forming is an easy and effective alternative to conventional reinforcement of thin metallic panels by welding or fastening of stringers.
- Hybrid manufacturing of stiffening grooves in additive deposited thin partsPublication . Cristino, Valentino A. M.; Pragana, João; Bragança, Ivo; Silva, Carlos; Martins, PauloThis paper is focused on the hybridization of additive manufacturing with single-point incremental forming to produce stiffening grooves in thin metal parts. An analytical model built upon in-plane stretching of a membrane is provided to determine the tool force as a function of the required groove depth and to estimate the maximum allowable groove depth that can be formed without tearing. The results for additively deposited stainless-steel sheets show that the proposed analytical model can replicate incremental plastic deformation of the stiffening grooves in good agreement with experimental observations and measurements. Anisotropy and lower formability caused by the dendritic-based microstructure of the additively deposited stainless-steel sheets justifies the reason why the maximum allowable depth of the stiffening grooves is approximately 27% smaller than that obtained for the wrought commercial sheets of the same material that are used for comparison purposes.
- Integration of forming operations on hybrid additive manufacturing systems based on fusion weldingPublication . Pragana, João; Cristino, Valentino A. M.; Bragança, Ivo; Silva, Carlos; Martins, PauloThis paper is focused on the integration of metal forming operations in hybrid systems that combine additive manufacturing (AM) by gas metal wire arc and subtractive manufacturing by machining. The investigation is carried out in AISI 316L stainless steel wire and draws from tensile testing to incremental sheet forming of truncated conical shapes. Commercial sheets from the same material are utilized for comparison purposes. Thickness measurements, digital image correlation (DIC), circle grid analysis (CGA) and microstructural and scanning electron microscopy (SEM) observations are carried out to understand how different is the mechanical behaviour of the deposited metal from that of commercial metal sheets and how significant is the influence of the deposited metal microstructure on its overall formability. Results confirm that integration of metal forming operations in hybrid AM routes is feasible despite the formability of deposited metal being smaller than that of the commercial metal sheets due to the strong anisotropy induced by the dendritic based microstructure of the deposited metal. Incremental forming of two deposited parts also allows concluding that integration of metal forming operations in hybrid AM systems is a step towards green and sustainable manufacturing by extending their field of applicability to the fabrication of complex ready-to-use parts requiring combination of different processes.