Loading...
4 results
Search Results
Now showing 1 - 4 of 4
- Evaluation of the amount of nanoparticles emitted in LASER additive manufacture/weldingPublication . Gomes, J. F.; Miranda, R.; Oliveira, J. P.; Esteves, H. M.; Albuquerque, PaulaObjectives: The objective of this study was the evaluation of the professional exposure to nanoparticles during tasks performed in workstations for production of metallic parts by laser welding additive manufacturing. Materials and methods: The study was developed in an installed additive manufacturing machine, having controlled temperature and humidity in an industrial unit where metal parts were being produced using stainless steel powders of granulometry of 10 to 35 μm. Results and discussion: Monitoring of airborne nanoparticles emission was made using adequate equipment, which showed considerable number of nanoparticles over the baseline, having the same composition as the steel powder used. Conclusion: It is concluded that the values of professional exposure to nanoparticles are high in these workstations and that the nanoparticles to which the workers are exposed are small in size (around 15 nm), thus having a strong capacity for alveolar penetration and, consequently, with a strong possibility of passing to the bloodstream, accumulating in the body.
- Evaluation of the amount of nanoparticles emitted in welding fume from stainless steel using different shielding gasesPublication . Pacheco, Rita; Gomes, João; Miranda, R.; Quintino, M. L.The primary objective of this study was to correlate the emission of macro and nanoparticles released during the process of metal inert gas/metal active gas (MIG/MAG) of stainless steel with different gas mixtures. Using different gas mixtures with different heat inputs, it was possible to determine fume formation rates and surface areas of nanoparticles with alveolar lung deposition capacity. It was found, how the various transfer modes and the type of gas protection, in particular, the percentage of active elements in the in the chemical composition of the gas, affect the amount of fumes generated and also the generation of nanoparticles with a high capacity of deposition. The spray transfer mode always shows higher values of nanoparticles surface area, unlike the fume formation rates. Among the tested mixtures 82%Ar+18%CO2 generates higher emissions of nanoparticles as well as fume formation rates.
- Characterization of airborne emission of nanoparticles in the ceramic industry in PortugalPublication . Esteves, Hélder; Bordado, J.; Gomes, João; Miranda, R.; Albuquerque, PaulaThe objective of this study was to evaluate occupational exposure to nanoparticles during some tasks performed in different production processes of different ceramic industries in Portugal, to select the places of greatest occupational exposure through the analysis of the sampled data, to verify what is the pulmonary accumulation in these places, to identify the composition of the released nanoparticles, apply a Control Banding Tool and try to understand which companies require more risk control measures. The study was carried out in three different national ceramics production industries, one for sanitary ceramics production, another for porcelain crockery production and finally another for the production of ornamental crockery (red paste). It is concluded that occupational exposure values to nanoparticles are high in all cases and that nanoparticles are very small in size (11.5 to 15.4 nm). Existing risk control measures are insufficient and verified risk levels are high (Risk Level 3 and 4). The chemical composition of the analyzed nanoparticles is similar regardless of the typology of the ceramic production plant and their chemical composition as a percentage of certain materials has a direct influence on crystallinity.
- Characterization of airborne emission of nanoparticles in the ceramic industry in PortugalPublication . Esteves, H.; Bordado, J.; Gomes, João; Miranda, R.; Albuquerque, PaulaThe objective of this study was to evaluate occupational exposure to nanoparticles during some tasks performed in different production processes of different ceramic industries in Portugal, to select the places of greatest occupational exposure through the analysis of the sampled data, to verify what is the pulmonary accumulation in these places, to identify the composition of the released nanoparticles, apply a Control Banding Tool and try to understand which companies require more risk control measures. The study was carried out in three different national ceramics production industries, one for sanitary ceramics production, another for porcelain crockery production, and finally another for the production of ornamental crockery (red paste). It is concluded that occupational exposure values to nanoparticles are high in all cases and that nanoparticles are very small in size (11.5 to 15.4 nm). Existing risk control measures are insufficient and verified risk levels are high (Risk Level 3 and 4). The chemical composition of the analyzed nanoparticles is similar regardless of the typology of the ceramic production plant and their chemical composition as a percentage of certain materials has a direct influence on crystallinity.