Loading...
2 results
Search Results
Now showing 1 - 2 of 2
- Solvent assisted biodiesel production by co-processing beef tallow and soybean oil over calcium catalystsPublication . Dias, Ana Paula Soares; Ramos, Marta; Catarino, Mónica Inês; Puna, Jaime; Gomes, JoãoDue to sustainability issues, biodiesel must be produced from low-grade fats and the conventional homogeneously-catalyzed processes must be replaced by more efficient and more profitable production processes such as heterogeneous ones. Biodiesel (fatty acids methyl esters, FAME) was produced from a mixture (50 wt%) of soybean oil and non-edible beef tallow over heterogeneous calcium-based catalysts obtained by calcination of scallop shells. In order to improve the catalytic performances, solvent assisted methanolysis was conducted using alcohols (ethanol, 1-propanol, isopropanol and isobutanol), acetone, methylcyclohexane, and tetrahydrofuran (THF) with Vmethanol/Vsolvent = 2.8. Catalytic data revealed that alcohol solvents adsorb competitively with methanol on the catalyst active sites reducing the FAME yield due to their slower alcoholysis rates. Hexane and methylcyclohexane are inadequate for methanolysis reactions since they are immiscible with methanol. THF and acetone are immiscible with the co-produced glycerin, which favors methyl esters formation by displacing the chemical equilibrium towards reaction products. Acetone performs better than THF (FAME yield gain of 14% against 3%) because of its higher miscibility with methanol. THF was the most effective solvent to avoid fat adsorption on the catalyst surface, a key factor for catalyst stability, and to improve the glycerin purity.
- Calcium diglyceroxide as a catalyst for biodiesel productionPublication . Catarino, Mónica Inês; Martins, Susana; Ana Paula Soares Dias; Pereira, Manuel; Gomes, JoãoCalcium diglyceroxide (CaD) was used as the catalyst for biodiesel production through oil methanolysis. It was evaluated its catalytic behavior, its air expo- sure tolerance, and the Ca leaching. CaD catalyst was synthesized from food waste scallop shell derived CaO (obtained by calcination at 900 degrees C) by contacting with a mixture of equal volumes of glycerin and methanol at 65 degrees C for 2 h. The CaO obtained by calcination of scallop shell was used as reference catalyst. In standard reaction conditions (2.5 h, methanol reflux temperature, 5 wt% (oil basis) catalyst loading, and methanol: oil = 12:1 moral ratio), CaD presented lower catalytic activity than CaO (FAME yield of 92% against 99%, respectively). 24 h repined CaD presented improved catalytic behavior probably due to the formation of surface Ca - OH groups, achieving 96% of FAME yield. Thermogravimetry (TG) data showed that inorganic residue was larger for biodiesel than for glycerin, being CaD catalyst more soluble than CaO. Data showed that CaD is unstable under reaction conditions, suffering leaching, but the absence of Matter Organic Non-Glycerol (MONG) in the glycerin phase allows to neglect the homogeneous contribution of the leached catalyst. CaD formation during reaction contributes to FAME contamination with Ca and promotes catalyst deactivation thus being an undesired occurrence.