Repository logo
 
Loading...
Profile Picture

Search Results

Now showing 1 - 10 of 11
  • Rheo-NMR study of water-based cellulose liquid crystal system at high shear rates
    Publication . Echeverria, Coro; Almeida, Pedro L.; Feio, Gabriel; Figueirinhas, João; Rey, Alejandro D.; Godinho, Maria Helena
    Since long ago cellulosic lyotropic liquid crystals were thought as potential materials to produce fibers competitive with spidersilk or Kevlar, yet the processing of high modulus materials from cellulose-based precursors was hampered by their complex rheological behavior. In this work, by using the Rheo-NMR technique, which combines deuterium NMR with rheology, we investigate the high shear rate regimes that may be of interest to the industrial processing of these materials. Whereas the low shear rate regimes were already investigated by this technique in different works [1-4], the high shear rates range is still lacking a detailed study. This work focuses on the orientational order in the system both under shear and subsequent relaxation process arising after shear cessation through the analysis of deuterium spectra from the deuterated solvent water. At the analyzed shear rates the cholesteric order is suppressed and a flow-aligned nematic is observed which for the higher shear rates develops after certain time periodic perturbations that transiently annihilate the order in the system. During relaxation the flow aligned nematic starts losing order due to the onset of the cholesteric helices leading to a period of very low order where cholesteric helices with different orientations are forming from the aligned nematic, followed in the final stage by an increase in order at long relaxation times corresponding to the development of aligned cholesteric domains. This study sheds light on the complex rheological behavior of chiral nematic cellulose-based systems and opens ways to improve its processing. (C) 2015 Elsevier Ltd. All rights reserved.
  • Tuning the 1H NMR paramagnetic relaxation enhancement and local order of [Aliquat]+-based systems mixed with DMSO
    Publication . Cordeiro, Rui; Beira, Maria; Cruz, Carlos; Figueirinhas, João; Corvo, Marta C.; Almeida, Pedro L.; Rosatella, Andreia; Mateus Afonso, Carlos Alberto; Daniel, Carla; Sebastião, Pedro
    Understanding the behavior of a chemical compound at a molecular level is fundamental, not only to explain its macroscopic properties, but also to enable the control and optimization of these properties. The present work aims to characterize a set of systems based on the ionic liquids [Aliquat][Cl] and [Aliquat][FeCl4] and on mixtures of these with different concentrations of DMSO by means of H-1 NMR relaxometry, diffusometry and X-ray diffractometry. Without DMSO, the compounds reveal locally ordered domains, which are large enough to induce order fluctuation as a significant relaxation pathway, and present paramagnetic relaxation enhancement for the [Aliquat][Cl] and [Aliquat][FeCl4] mixture. The addition of DMSO provides a way of tuning both the local order of these systems and the relaxation enhancement produced by the tetrachloroferrate anion. Very small DMSO volume concentrations (at least up to 1%) lead to enhanced paramagnetic relaxation without compromising the locally ordered domains. Larger DMSO concentrations gradually destroy these domains and reduce the effect of paramagnetic relaxation, while solvating the ions present in the mixtures. The paramagnetic relaxation was explained as a correlated combination of inner and outer-sphere mechanisms, in line with the size and structure differences between cation and anion. This study presents a robust method of characterizing paramagnetic ionic systems and obtaining a consistent analysis for a large set of samples having different co-solvent concentrations.
  • From cellulosic based liquid crystalline sheared solutions to 1D and 2D soft materials
    Publication . Godinho, Maria Helena; Almeida, Pedro L.; Figueirinhas, João
    Liquid crystalline cellulosic-based solutions described by distinctive properties are at the origin of different kinds of multifunctional materials with unique characteristics. These solutions can form chiral nematic phases at rest, with tuneable photonic behavior, and exhibit a complex behavior associated with the onset of a network of director field defects under shear. Techniques, such as Nuclear Magnetic Resonance (NMR), Rheology coupled with NMR (Rheo-NMR), rheology, optical methods, Magnetic Resonance Imaging (MRI), Wide Angle X-rays Scattering (WAXS), were extensively used to enlighten the liquid crystalline characteristics of these cellulosic solutions. Cellulosic films produced by shear casting and fibers by electrospinning, from these liquid crystalline solutions, have regained wider attention due to recognition of their innovative properties associated to their biocompatibility. Electrospun membranes composed by helical and spiral shape fibers allow the achievement of large surface areas, leading to the improvement of the performance of this kind of systems. The moisture response, light modulated, wettability and the capability of orienting protein and cellulose crystals, opened a wide range of new applications to the shear casted films. Characterization by NMR, X-rays, tensile tests, AFM, and optical methods allowed detailed characterization of those soft cellulosic materials. In this work, special attention will be given to recent developments, including, among others, a moisture driven cellulosic motor and electro-optical devices.
  • Liquid crystal beads constrained on thin cellulosic fibers: Electric field induced microrotors and N-I transition
    Publication . Geng, Yong; Almeida, Pedro L.; Figueirinhas, João; Terentjev, Eugene; Godinho, Maria Helena
    We directly visualize the response of nematic liquid crystal drops of toroidal topology threaded in cellulosic fibers, suspended in air, to an AC electric field and at different temperatures over the N-I transition. This new liquid crystal system can exhibit non-trivial point defects, which can be energetically unstable against expanding into ring defects depending on the fiber constraining geometries. The director anchoring tangentially near the fiber surface and homeotropically at the air interface makes a hybrid shell distribution that in turn causes a ring disclination line around the main axis of the fiber at the center of the droplet. Upon application of an electric field, E, the disclination ring first expands and moves along the fiber main axis, followed by the appearance of a stable "spherical particle" object orbiting around the fiber at the center of the liquid crystal drop. The rotation speed of this particle was found to vary linearly with the applied voltage. This constrained liquid crystal geometry seems to meet the essential requirements in which soliton-like deformations can develop and exhibit stable orbiting in three dimensions upon application of an external electric field. On changing the temperature the system remains stable and allows the study of the defect evolution near the nematic-isotropic transition, showing qualitatively different behaviour on cooling and heating processes. The necklaces of such liquid crystal drops constitute excellent systems for the study of topological defects and their evolution and open new perspectives for application in microelectronics and photonics.
  • Deuterium NMR Study of Orientational Order in Cellulosic Network Microfibers
    Publication . Kundu, S.; Feio, G.; Pinto, L. F. V.; Almeida, Pedro L.; Figueirinhas, João; Godinho, Maria Helena
    Deuterium NMR was used to investigate the orientational order in a composite cellulosic formed by liquid crystalline acetoxypropylcellulose (A PC) and demented nematic 4'-penty1-4-cyanobiphenyl (5CB-4 alpha d(2)) with the per centage of 85% A PC by weight Three forms of the composite including electro spun microfibers, thin film and bulk samples were analyzed The NMR results initially suggest two distinct scenarios, one whet e the 503-alpha d(2), is confined to small droplets with dimensions smaller than the magnetic coherence length and the other where the 503-alpha d(2) molecules arc aligned with the A PC network chains Polarized optical microscopy (POW from thin film samples along with all the NMR results show the presence of 5CB-alpha d(2) droplets in the composite systems with a nematic wetting layer at the APC-5CB-alpha d(2) interface that experiences and order disorder transition driven by the polymer network N-I transition The characterization of the APC network I-N transition shows a pronounced subcritical behavior within a heterogeneity scenario.
  • Light shutters from nanocrystalline cellulose rods in a nematic liquid crystal
    Publication . Geng, Yong; Brogueira, Pedro; Figueirinhas, João; Godinho, Maria Helena; Almeida, Pedro L.
    This work reports a recently developed electro-optical (EO) device that can potentially be used as a light shutter or a privacy window. By using nanocrystalline cellulose rods, we were able to improve some of the most relevant parameters characterising the EO behaviour. A brief description of the proposed working mechanism for these devices is presented, and numerical simulations based on this mechanism of both the optical transmission and the cells' electrical capacitance are compared with the obtained results, validating the underlying working model considered.
  • A cellulosic liquid crystal pool for cellulose nanocrystals: structure and molecular dynamics at high shear rates
    Publication . Echeverria, Coro; Almeida, Pedro L.; Feio, Gabriel; Figueirinhas, João; Godinho, Maria Helena
    Cellulose and its derivatives, such as hydroxypropylcellulose (HPC) have been studied for a long time but they are still not well understood particularly in liquid crystalline solutions. These systems can be at the origin of networks with properties similar to liquid crystalline (LC) elastomers. The films produced from LC solutions can be manipulated by the action of moisture allowing for instance the development of a soft motor (Geng et al., 2013) driven by humidity. Cellulose nanocrystals (CNC), which combine cellulose properties with the specific characteristics of nanoscale materials, have been mainly studied for their potential as a reinforcing agent. Suspensions of CNC can also self-order originating a liquid-crystalline chiral nematic phases. Considering the liquid crystalline features that both LC-HPC and CNC can acquire, we prepared LC-HPC/CNC solutions with different CNC contents (1,2 and 5 wt.%). The effect of the CNC into the LC-HPC matrix was determined by coupling rheology and NMR spectroscopy - Rheo-NMR a technique tailored to analyse orientational order in sheared systems. (C) 2015 Elsevier Ltd. All rights reserved.
  • Water-Based Cellulose Liquid Crystal System Investigated by Rheo-NMR
    Publication . Geng, Yong; Almeida, Pedro L.; Feio, Gabriel; Figueirinhas, João; Godinho, Maria Helena
    Water-based cellulose cholesteric liquid crystalline phases at rest can undergo structural changes induced by shear flow. This reflects on the deuterium spectra recorded when the system is investigated by rheo-nuclear magnetic resonance (rheo-NMR) techniques. In this work, the model system hydroxypropylcellulose (HPC)+water is revisited using rheo-NMR to clarify unsettled points regarding its behavior under shear and in relaxation. The NMR spectra allow the identification of five different stable ordering states, within shear and relaxation, which are well integrated in a mesoscopic picture of the system's structural evolution under shear and relaxation. This picture emerging from the large body of studies available for this system by other experimental techniques, accounts well for the NMR data and is in good agreement with the three distinct regions of steady shear flow recognized for some lyotropic LC polymers. Shear rates in between 0.1 and 1.0 s(-1) where investigated using a Taylor-Couette flow and deuterated water was used as solvent for the deuterium NMR (DNMR) analysis.
  • Molecular order and dynamics of water in hybrid cellulose acetate-silica asymmetric membranes
    Publication . Beira, Maria Jardim; Condesso, Miguel; Pereira Da Silva, Miguel; Cosme, Pedro; Almeida, Pedro L.; Corvo, Marta C.; Sebastião, Pedro J.; Figueirinhas, João; De Pinho, Maria Norberta
    In this work 2H NMR spectroscopy and 1H NMR relaxometry and diffusometry were used to characterise water order and dynamics in cellulose acetate/silica asymmetric membranes. Two hydrated membranes were characterised allowing the identification of extra ordering of the water molecules and the presence in each membrane of up to two spectral components with different degrees of order and different T1 values. The mechanism behind this order increase was ascribed to the rapid exchange of the water molecules between the pore walls and its interior. T1 relaxometry dispersions allowed for the identification of the relevant mechanisms of pore-confined water motion, with rotations mediated by translational displacements (RMTD) as the dominant mechanism in the low frequency region. Using the RMTD low cut off frequency along with the in situ directly measured diffusion constant it was possible do determine characteristic lengths of correlated water motion in both membranes studied, which fall in ranges compatible with typical pore dimensions in similar membranes.
  • Micro – and nanofibers and liquid crystals for ligth-scattering shutters: Simulation of electrp-optical properties
    Publication . Almeida, Pedro L.; Godinho, Maria Helena; Figueirinhas, João
    This work demonstrates the feasibility of using polymeric micro- and nanofiber-composed films and liquid crystals as electrically switchable scattering light shutters. We present a concept of electro-optic device based on an innovative combination of two mature technologies: optics of nematic liquid crystals and electrospinning of nanofibers. These devices have electric and optical characteristics far superior to other comparable methods. The simulation presented shows results that are highly consistent with those of experiments and that explain the working mechanism of the devices.