Loading...
Person
Marques Mendes Almeida da Rosa Leal, Catarina
14 results
Search Results
Now showing 1 - 10 of 14
- Real-time rheology of actively growing bacteriaPublication . Portela, R.; Almeida, Pedro L.; Patricio, Pedro; Cidade, T.; Sobral, R. G.; R. Leal, CatarinaThe population growth of a Staphylococcus aureus culture, an active colloidal system of spherical cells, was followed by rheological measurements, under steady-state and oscillatory shear flows. We observed a rich viscoelastic behavior as a consequence of the bacteria activity, namely, of their multiplication and density-dependent aggregation properties. In the early stages of growth (lag and exponential phases), the viscosity increases by about a factor of 20, presenting several drops and full recoveries. This allows us to evoke the existence of a percolation phenomenon. Remarkably, as the bacteria reach their late phase of development, in which the population stabilizes, the viscosity returns close to its initial value. Most probably, this is caused by a change in the bacteria physiological activity and in particular, by the decrease of their adhesion properties. The viscous and elastic moduli exhibit power-law behaviors compatible with the "soft glassy materials" model, whose exponents are dependent on the bacteria growth stage. DOI: 10.1103/PhysRevE.87.030701.
- Bacterial cellulose: a versatile biopolymer for wound dressing applicationsPublication . Portela, Raquel; R. Leal, Catarina; Almeida, Pedro L.; Sobral, RitaAlthough several therapeutic approaches are available for wound and burn treatment and much progress has been made in this area, room for improvement still exists, driven by the urgent need of better strategies to accelerate wound healing and recovery, mostly for cases of severe burned patients. Bacterial cellulose (BC) is a biopolymer produced by bacteria with several advantages over vegetal cellulose, such as purity, high porosity, permeability to liquid and gases, elevated water uptake capacity and mechanical robustness. Besides its biocompatibility, BC can be modified in order to acquire antibacterial response and possible local drug delivery features. Due to its intrinsic versatility, BC is the perfect example of a biotechnological response to a clinical problem. In this review, we assess the BC main features and emphasis is given to a specific biomedical application: wound dressings. The production process and the physical-chemical properties that entitle this material to be used as wound dressing namely for burn healing are highlighted. An overview of the most common BC composites and their enhanced properties, in particular physical and biological, is provided, including the different production processes. A particular focus is given to the biochemistry and genetic manipulation of BC. A summary of the current marketed BC-based wound dressing products is presented, and finally, future perspectives for the usage of BC as wound dressing are foreseen.
- Rheology of living cellsPublication . Portela, R.; Franco, Jose M.; Almeida, Pedro L.; Patricio, Pedro; Sobral, Rita; R. Leal, CatarinaThe mechanical behavior of living cells, during planktonic growth, has been thoroughly explored combining common biological techniques with rheology and rheo-imaging measurements. Under a shear flow, bacterial cultures of Staphylococcus aureus revealed a complex and rich rheological behavior not usually accessed in biological studies. In particular, in stationary shear flow, the viscosity increased during the exponential phase and returned close to its initial value at the late phase of growth, accompanied by the stabilization of the bacterial population. In oscillatory flow, the elastic and viscous moduli exhibited power-law behaviors whose exponents are dependent on the bacteria growth stage, and can be associated to a Soft Glassy Material behavior. These behaviors were framed in a microscopic model that suggests the formation of a dynamic web-like structure, where specific aggregation phenomena may occur, depending on growth stage and cell density. Furthermore, systematic measurements combining optical density and dry weight techniques presented new evidences, which confirmed that the observed cell aggregation patterns developed during growth, under shear, can not only be cell density dependent.
- Rheology of the cytoskeleton as a fractal networkPublication . Patricio, Pedro; R. Leal, Catarina; Duarte, Jorge; Januário, CristinaWe model the cytoskeleton as a fractal network by identifying each segment with a simple Kelvin-Voigt element with a well defined equilibrium length. The final structure retains the elastic characteristics of a solid or a gel, which may support stress, without relaxing. By considering a very simple regular self-similar structure of segments in series and in parallel, in one, two, or three dimensions, we are able to express the viscoelasticity of the network as an effective generalized Kelvin-Voigt model with a power law spectrum of retardation times L similar to tau(alpha). We relate the parameter alpha with the fractal dimension of the gel. In some regimes ( 0 < alpha < 1), we recover the weak power law behaviors of the elastic and viscous moduli with the angular frequencies G' similar to G" similar to w(alpha) that occur in a variety of soft materials, including living cells. In other regimes, we find different power laws for G' and G".
- Living bacteria rheology: Population growth, aggregation patterns, and collective behaviour under diferent shear flowsPublication . Patricio, Pedro; Almeida, Pedro L.; Portela, R.; Sobral, R. G.; Grilo, I. R.; Cidade, T.; R. Leal, CatarinaThe activity of growing living bacteria was investigated using real-time and in situ rheology-in stationary and oscillatory shear. Two different strains of the human pathogen Staphylococcus aureus-strain COL and its isogenic cell wall autolysis mutant, RUSAL9-were considered in this work. For low bacteria density, strain COL forms small clusters, while the mutant, presenting deficient cell separation, forms irregular larger aggregates. In the early stages of growth, when subjected to a stationary shear, the viscosity of the cultures of both strains increases with the population of cells. As the bacteria reach the exponential phase of growth, the viscosity of the cultures of the two strains follows different and rich behaviors, with no counterpart in the optical density or in the population's colony-forming units measurements. While the viscosity of strain COL culture keeps increasing during the exponential phase and returns close to its initial value for the late phase of growth, where the population stabilizes, the viscosity of the mutant strain culture decreases steeply, still in the exponential phase, remains constant for some time, and increases again, reaching a constant plateau at a maximum value for the late phase of growth. These complex viscoelastic behaviors, which were observed to be shear-stress-dependent, are a consequence of two coupled effects: the cell density continuous increase and its changing interacting properties. The viscous and elastic moduli of strain COL culture, obtained with oscillatory shear, exhibit power-law behaviors whose exponents are dependent on the bacteria growth stage. The viscous and elastic moduli of the mutant culture have complex behaviors, emerging from the different relaxation times that are associated with the large molecules of the medium and the self-organized structures of bacteria. Nevertheless, these behaviors reflect the bacteria growth stage.
- Rheo-optical characterization of liquid crystalline acetoxypropylcellulose melt undergoing large shear flow and relaxation after flow cessationPublication . Teixeira, Paulo F.; Fernandes, Susete N.; Canejo, João; Godinho, Maria Helena; Covas, José A.; R. Leal, Catarina; Hilliou, LoicThe rheological and structural characteristics of acetoxypropylcellulose (APC) nematic melt are studied at shear rates ranging from 10 s(-1) to 1000 s(-1) which are relevant to extrusion based processes. APC shows a monotonic shear thinning behavior over the range of shear rates tested. The negative extrudate-swell shows a minimum when a critical shear rate (gamma) over dot(c) is reached. For shear rates smaller than (gamma) over dot(c), the flow-induced texture consists of two set of bands aligned parallel and normal to the flow direction. At shear rates larger than (gamma) over dot(c), the flow induced texture is reminiscent of a 2 fluids structure. Close to the shearing walls, domains elongated along the flow direction and stacked along the vorticity are imaged with POM, whereas SALS patterns indicate that the bulk of the sheared APC is made of elliptical domains oriented along the vorticity. No full nematic alignment is achieved at the largest shear rate tested. Below (gamma) over dot(c), the stress relaxation is described by a stretched exponential. Above (gamma) over dot(c), the stress relaxation is described by a fast and a slow process. The latter coincides with the growth of normal bands thicknesses, as the APC texture after flow cessation consists of two types of bands with parallel and normal orientations relative to the flow direction. Both bands thicknesses do not depend on the applied shear rate, in contrast to their orientation. (C) 2015 Elsevier Ltd. All rights reserved.
- Electrorheology study of a series of LC cyanobiphenyls: Experimental and theoretical treatmentPublication . Patricio, Pedro; R. Leal, Catarina; Pinto, L.; Boto, A.; Cidade, M. T.In this work we study the electro-rheological behaviour of a series of four liquid crystal (LC) cyanobiphenyls with a number of carbon atoms in the alkyl group, ranging from five to eight (5CB–8CB). We present the flow curves for different temperatures and under the influence of an external electric field, ranging from 0 to 3 kV/mm, and the viscosity as a function of the temperature, for the same values of electric field, obtained for different shear rates. Theoretical interpretation of the observed behaviours is proposed in the framework of the continuum theory of Leslie–Ericksen for low molecular weight nematic LCs. In our analysis, the director alignment angle is only a function of the ratio between the shear rate and the square of the electric field – boundary conditions are neglected. By fitting the theoretical model to the experimental data, we are able to determine some viscosity coefficients and the dielectric anisotropy as a function of temperature. To interpret the behaviour of the flow curves near the nematic–isotropic transitions, we apply the continuum theory of Olmsted–Goldbart, which extends the theory of Leslie–Ericksen to the case where the degree of alignment of the LC molecules can also vary.
- Following micelles with rheo-NMRPublication . Almeida, Pedro L.; Feio, G.; Pereira, M.; Scheven, U.; R. Leal, CatarinaThe rheological behaviour of the micellar system Cetyltrimethylammonium Bromide (CTAB)/Sodium Salicylate (NaSal) in water is highly dependent on the components concentration and temperature. The surfactant CTAB forms spherical micelles in water above a certain concentration (CD), which upon addition of a salt (NaSal) elongate to form entangled wormlike structures, also known as “living polymers”. The viscosity of wormlike micelles solutions increases dramatically with the increase of salt concentration (CS), changing from quasi-newtonian to a viscoelastic behaviour in the gel-like, highly entangled state. Such rich rheological behaviour has already been characterized by some of the authors and in the literature, e.g., [1-3]. The rheological behaviour of CTAB/NaSal aqueous solutions in the regime CD/Cs>1 are presented in this work. Furthermore, we followed the rheological behaviour of these solutions by a rheo-NMR technique, allowing for an insight of “what happens” inside the sample during the application of a shear flow. To achieve this goal we performed quantitative flow rate measurements using velocity NMR mapping in the rheo-NMR experiments, developed by Callaghan [4]. Attempts to characterize the velocity profile in this system has already been described [5] using an optical-shear flow experimental setup, although for solutions with CD/Cs<1, where the surfactant [CTAB] has always a smaller concentration than the salt [NaSal].
- Cell necklaces behave as a soft glassy materialPublication . Franco, Jose M.; Patricio, Pedro; Almeida, Pedro L.; Portela, Raquel; Sobral, Rita; R. Leal, CatarinaPreviously we have reported a complex and rich viscoelastic behavior observed during the Planktonic growth of S. aureus strain COL1. In particular, in stationary shear flow, the viscosity Keeps increasing during the exponential phase and returns close to its initial value for the late phase of growth, where the bactéria population stabilizes. In oscillatory flow, the elastic and viscous moduli exhibit power--‐law behaviors whose exponentes are dependente on the bacteria growth stage. These power--‐law dependencies of G’ and G’’ match a Soft Glassy Material behavior. To describe this observed behavior, we have hypothesized a microscopic model considering the formation of a dynamic web--‐like structure, where percolation phenomena can occur, depending on growth stage and cell density. In this communication we describe the formation of these web--‐like structures, resembling cell necklaces at a specific time interval during bacterial growth. These findings were obtained by combining the previous data with new measurements performed in a rheometer with real--‐time image acquisition.
- Bacterial growth screened by rheologyPublication . Portela, Raquel; Pereira, M.; Sobral, Rita; Almeida, Pedro L.; R. Leal, CatarinaThe study of bacterial growth is a challenging field since it aims to describe the behaviour of microorganisms under different physical or chemical conditions. Bacterial growth as a biofilm is of particular interest as these gel-like structures are detrimental for all applications where “clean” surfaces are most important, and are related to failure of infection treatment, food spoilage and oil pipeline contamination, amongst others. In the literature one can find several works concerning the characterization of the mechanical behaviour of bacterial biofilms, although mostly are implemented over solid biofilms, as they appear in real situations [1-3], to study the adhesion properties in surfaces. In this work we applied a different technique to monitor the growth rate of a coccoid shaped bacterial species, the human pathogen Staphylococcus aureus.