Browsing by Issue Date, starting with "2024-09-06"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- Assessment of influential operational parameters in the mitigation of CO2 emissions in a power plant: case study in PortugalPublication . Balanuta, Vítor; Baptista, Patrícia; Carreira, Fernando; Duarte, Gonçalo; Casaca, Cláudia S. S. L.The European decarbonization goals and requirement for energy independence are mostly relying on intermittent renewable energy sources for electrification. A numerical model was developed to simulate the operation of a steam generator, allowing a study of the potential impacts of retrofitting existing coal-fired power plants to operate with biomass or coal–biomass mixtures on combustion parameters and CO2 emissions. The results obtained using the operational parameters of the Sines power plant indicate that a mixture of 25% coal and 75% pine sawdust allow operation at λ = 1.8, demonstrating that a small amount of coal allows operation near the coal combustion parameters (λ = 1.9). These conditions have the drawback of a reduction of 8.7% in adiabatic flame temperature but a significant reduction of 57.5% in CO2 emissions, considering the biomass as carbon-neutral.
- Assessment of influential operational parameters in the mitigation of CO2 emissions in a power plant: case study in PortugalPublication . Balanuta, Vítor; Baptista, Patricia; Neves da Fonseca Cardoso Carreira, Fernando Paulo; Duarte, Gonçalo; Casaca, Cláudia Sofia Séneca da LuzThe European decarbonization goals and requirement for energy independence are mostly relying on intermittent renewable energy sources for electrification. A numerical model was developed to simulate the operation of a steam generator, allowing a study of the potential impacts of retrofitting existing coal-fired power plants to operate with biomass or coal–biomass mixtures on combustion parameters and CO2 emissions. The results obtained using the operational parameters of the Sines power plant indicate that a mixture of 25% coal and 75% pine sawdust allow operation at λ = 1.8, demonstrating that a small amount of coal allows operation near the coal combustion parameters (λ = 1.9). These conditions have the drawback of a reduction of 8.7% in adiabatic flame temperature but a significant reduction of 57.5% in CO2 emissions, considering the biomass as carbon-neutral.
- Survey data preprocessing for optimal modelling through ANNs applied to management environmentsPublication . Texeira Quirós, Joaquín; Texeira Justino, Maria do Rosário; Gonçalves, António José; Godinho Antunes, Marina; Ribeiro Mucharreira, PedroSurveys are one of the most important tasks to be executed to get valued information. One of the main problems is how the data about many different persons can be processed to give good information about their environment. Modelling environments through Artificial Neural Networks (ANNs) is highly common because ANN’s are excellent to model predictable environments using a set of data. ANN’s are good in dealing with sets of data with some noise, but they are fundamentally surjective mathematical functions, and they aren’t able to give different results for the same input. So, if an ANN is trained using data where samples with the same input configuration has different outputs, which can be the case of survey data, it can be a major problem for the success of modelling the environment. The environment used to demonstrate the study is a strategic environment that is used to predict the impact of the applied strategies to an organization financial result, but the conclusions are not limited to this type of environment. Therefore, is necessary to adjust, eliminate invalid and inconsistent data. This permits one to maximize the probability of success and precision in modeling the desired environment. This study demonstrates, describes and evaluates each step of a process to prepare data for use, to improve the performance and precision of the ANNs used to obtain the model. This is, to improve the model quality. As a result of the studied process, it is possible to see a significant improvement both in the possibility of building a model as in its accuracy.