Browsing by Author "Sanguino, P."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Optical properties and transport in PLD-GaNPublication . Niehus, Manfred; Sanguino, P.; Monteiro, T.; Soares, M. J.; Pereira, E.; Vieira, Manuela; Koynov, S.; Schwarz, R.We present structural, optical and transport data on GaN samples grown by hybrid, two-step low temperature pulsed laser deposition. The band gap of samples with good crystallinity has been deduced from optical spectra. Large below gap band tails were observed. In samples with the lowest crystalline quality the PL spectra are quite dependent on spot laser incidence. The most intense PL lines can be attributed to excitons bounded to stacking faults. When the crystalline quality of the samples is increased the ubiquitous yellow emission band can be detected following a quenching process described by a similar activation energy to that one found in MOCVD grown samples. The samples with the highest quality present, besides the yellow band, show a large near band edge emission which peaked at 3.47 eV and could be observed up to room temperature. The large width of the NBE is attributed to effect of a wide distribution of band tail states on the excitons. Photoconductivity data supports this interpretation.
- Sensor element for a metal-insulator-semiconductor camera system (MISCam)Publication . Schwarz, R.; Fernandes, Miguel; Martins, J.; Fantoni, Alessandro; Vieira, Manuela; Sanguino, P.; Carvalho, C. N.; Muschik, T.We discuss the operation of a new type of optical sensor (MISCam) based on a metal-insulator-semiconductor (MIS) structure. The operation principle relies on light-induced changes of the band bending and barrier height at the interface between semiconductor and insulator. An image is obtained from the quenching of the ac signal in analogy to the principle of the laser-scanned photodiode (LSP). Lateral resolution depends on the semiconductor material chosen. We have characterised the MIS structures by C-V, I-V, and spectral response measurements testing different types of insulators like a-Si3N4, SiO2, and AlN. The presence of slow interface charges allows for image memory. Colour sensors can be realised by controlling sign and magnitude of the electric fields in the base and the interface region.