Browsing by Author "Godderis, Lode"
Now showing 1 - 8 of 8
Results Per Page
Sort Options
- Caracterização de biomarcadores de genotoxicidade em trabalhadores expostos a crómio hexavalente: um estudo no âmbito da Iniciativa Europeia em Biomonitorização HumanaPublication . Tavares, Ana; Aimonen, Kukka; Ndaw, Sophie; Fucic, Aleksandra; Catalán, Julia; Duca, Radu Corneliu; Godderis, Lode; Gomes, Bruno C.; Janasik, Beata; Ladeira, Carina; Louro, Henriqueta; Namorado, Sónia; Van Nieuwenhuyse, An; Norppa, Hannu; Scheepers, Paul T.; Ventura, Célia; Verdonck, Jelle; Viegas, Susana; Wasowicz, Wojciech; Santonen, Tiina; Silva, Maria JoãoNo âmbito da Iniciativa Europeia em Biomonitorização Humana (HBM4EU) realizou-se um estudo ocupacional, envolvendo trabalhadores com potencial exposição a crómio hexavalente [Cr(VI)], um reconhecido agente carcinogénico. No presente estudo são apresentados os resultados de biomarcadores de genotoxicidade, incluindo a análise de lesão no DNA e de alterações cromossómicas em células sanguíneas. O estudo foi realizado em vários Países Europeus e abrangeu trabalhadores de diversos setores industriais e atividades, bem como um grupo de controlo constituído por trabalhadores administrativos das mesmas empresas (controlo interno) e de outras não relacionadas com produção/aplicação de Cr(VI) (controlo externo). Os resultados mostraram níveis de alterações cromossómicas (ensaio do micronúcleo) e de lesão no DNA (ensaio do cometa) significativamente aumentados nos trabalhadores expostos comparativamente aos controlos externos (p=0,03; p<0,001, respetivamente). Estes resultados sugerem que mesmo um baixo nível de exposição ao Cr(VI) representa um risco acrescido para a saúde dos trabalhadores e, principalmente, para os que realizam cromagem em banho. O grupo controlo interno apresentou níveis médios de lesões no DNA e nos cromossomas comparáveis aos do grupo exposto, salientando a relevância de se considerarem também em risco. O uso de biomarcadores de efeito demonstrou ser crucial para a deteção precoce de efeitos biológicos decorrentes de baixos níveis de exposição ao Cr(VI), contribuindo para a identificação de subgrupos em maior risco. O presente estudo vem apoiar a necessidade de uma reavaliação do limite de exposição ocupacional a Cr(VI), bem como da implementação de medidas de gestão de risco conducentes a uma melhor proteção da saúde dos trabalhadores.
- HBM4EU chromates study: determinants of exposure to hexavalent chromium in plating, welding and other occupational settingsPublication . Viegas, Susana; Martins, Carla; Bocca, Beatrice; Bousoumah, Radia; Duca, Radu Corneliu; Galea, Karen S.; Godderis, Lode; Iavicoli, Ivo; Janasik, Beata; Jones, Kate; Leese, Elizabeth; Leso, Veruscka; Ndaw, Sophie; van Nieuwenhuyse, An; Poels, Katrien; Porras, Simo P.; Ruggieri, Flavia; Silva, Maria João; Verdonck, Jelle; Wasowicz, Wojciech; Scheepers, Paul T. J.; Santonen, Tiina; Ladeira, Carina; Ribeiro, EdnaWork-related exposures in industrial processing of chromate (chrome plating, surface treatment, and welding) raise concerns regarding the health risk of hexavalent chromium (Cr(VI)). In this study, performed under the HBM4EU project, we focused on better understanding the determinants of exposure and recognising how risk management measures (RMMs) contribute to a reduction in exposure. HBM and occupational hygiene data were collected from 399 workers and 203 controls recruited in nine European countries. Urinary total chromium (U-Cr), personal inhalable and respirable dust of Cr and Cr(VI), and Cr from hand wipes were collected. Data on the RMMs were collected by questionnaires. We studied the association between different exposure parameters and the use of RMMs. The relationship between exposure by inhalation and U-Cr in different worker groups was analysed using regression analysis and found a strong association. Automatisation of Cr electroplating dipping explained lower exposure levels in platers. The use of personal protective equipment resulted in lower U-Cr levels in welding, bath plating, and painting. An effect of wearing gloves was observed in machining. An effect of local exhaust ventilation and training was observed in welding. Regression analyses showed that in platers, exposure to an air level of 5 µg/m3 corresponds to a U-Cr level of 7 µg/g of creatinine. In welders, the same inhalation exposure resulted in lower U-Cr levels reflecting toxicokinetic differences of different chromium species.
- HBM4EU chromates study: genotoxicity and oxidative stress biomarkers in workers exposed to hexavalent chromiumPublication . Tavares, Ana; Aimonen, Kukka; Ndaw, Sophie; Fučić, Aleksandra; Catalán, Julia; Duca, Radu Corneliu; Godderis, Lode; Gomes, Bruno C.; Janasik, Beata; Ladeira, Carina; Louro, Henriqueta; Namorado, Sónia; Nieuwenhuyse, An Van; Norppa, Hannu; Scheepers, Paul T. J.; Ventura, Célia; Verdonck, Jelle; Viegas, Susana; Wasowicz, Wojciech; Santonen, Tiina; Silva, Maria JoãoA study was conducted within the European Human Biomonitoring Initiative (HBM4EU) to characterize occupational exposure to Cr(VI). Herein we present the results of biomarkers of genotoxicity and oxidative stress, including micronucleus analysis in lymphocytes and reticulocytes, the comet assay in whole blood, and malondialdehyde and 8-oxo-2′-deoxyguanosine in urine. Workers from several Cr(VI)-related industrial activities and controls from industrial (within a company) and non-industrial (outwith company) environments were included. The significantly increased genotoxicity (p = 0.03 for MN in lymphocytes and reticulocytes; p < 0.001 for comet assay data) and oxidative stress levels (p = 0.007 and p < 0.001 for MDA and 8-OHdG levels in pre-shift urine samples, respectively) that were detected in the exposed workers over the outwith company controls suggest that Cr(VI) exposure might still represent a health risk, particularly, for chrome painters and electrolytic bath platers, despite the low Cr exposure. The within-company controls displayed DNA and chromosomal damage levels that were comparable to those of the exposed group, highlighting the relevance of considering all industry workers as potentially exposed. The use of effect biomarkers proved their capacity to detect the early biological effects from low Cr(VI) exposure and to contribute to identifying subgroups that are at higher risk. Overall, this study reinforces the need for further re-evaluation of the occupational exposure limit and better application of protection measures. However, it also raised some additional questions and unexplained inconsistencies that need follow-up studies to be clarified.
- HBM4EU chromates study: overall results and recommendations for the biomonitoring of occupational exposure to hexavalent chromiumPublication . Santonen, Tiina; Porras, Simo P.; Bocca, Beatrice; Bousoumah, Radia; Duca, Radu Corneliu; Galea, Karen S.; Godderis, Lode; Göen, Thomas; Hardy, Emilie; Iavicoli, Ivo; Janasik, Beata; Jones, Kate; Leese, Elizabeth; Leso, Veruscka; Louro, Henriqueta; Majery, Nicole; Ndaw, Sophie; Pinhal, Hermínia; Ruggieri, Flavia; Silva, Maria J.; van Nieuwenhuyse, An; Verdonck, Jelle; Viegas, Susana; Wasowicz, Wojciech; Sepai, Ovnair; Scheepers, Paul T.J.; Aimonen, Kukka; Antoine, Guillaume; Anzion, Rob; Burgart, Manuella; Castaño, Argelia; Cattaneo, Andrea; Cavallo, Domenico Maria; De Palma, Giuseppe; Denis, Flavien; Gambelunghe, Angela; Gomes, Bruno; Hanser, Ogier; Helenius, Riikka; Ladeira, Carina; López, Marta Esteban; Lovreglio, Piero; Marsan, Philippe; Melczer, Mathieu; Nogueira, Ana; Pletea, Elisabeta; Poels, Katrien; Remes, Jouko; Ribeiro, Edna; Santos, Sílvia Reis; Schaefers, Françoise; Spankie, Sally; Spoek, Robert; Rizki, Mohamed; Rousset, Davy; van Dael, Maurice; Veijalainen, HennaExposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating, and other surface treatment processes. The aim of this study was to provide EU-relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint, and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding, the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals.
- HBM4EU chromates study: reflection and lessons learnt from designing and undertaking a collaborative European biomonitoring study on occupational exposure to hexavalent chromiumPublication . Galea, Karen S.; Porras, Simo P.; Viegas, Susana; Bocca, Beatrice; Bousoumah, Radia; Duca, Radu Corneliu; Godderis, Lode; Iavicoli, Ivo; Janasik, Beata; Jones, Kate; Knudsen, Lisbeth E.; Leese, Elizabeth; Leso, Veruscka; Louro, Henriqueta; Ndaw, Sophie; Ruggieri, Flavia; Sepai, Ovnair; Scheepers, Paul T. J.; Silva, Maria J.; Wasowicz, Wojciech; Santonen, TiinaThe EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. As part of HBM4EU, we presented a protocol for a multicentre study to characterize occupational exposure to hexavalent chromium (Cr(VI)) in nine European countries (HBM4EU chromates study). This study intended to collect data on current occupational exposure and to test new indicators for chromium (Cr) biomonitoring (Cr(VI) in exhaled breath condensate and Cr in red blood cells), in addition to traditional urinary total Cr analyses. Also, data from occupational hygiene samples and biomarkers of early biological effects, including genetic and epigenetic effects, was obtained, complementing the biomonitoring information. Data collection and analysis was completed, with the project findings being made separately available. As HBM4EU prepares to embark on further European wide biomonitoring studies, we considered it important to reflect on the experiences gained through our harmonised approach. Several practical aspects are highlighted for improvement in future studies, e.g., more thorough/earlier training on the implementation of standard operating procedures for field researchers, training on the use of the data entry template, as well as improved company communications. The HBM4EU chromates study team considered that the study had successfully demonstrated the feasibility of conducting a harmonised multicentre investigation able to achieve the research aims and objectives. This was largely attributable to the engaged multidisciplinary network, committed to deliver clearly understood goals. Such networks take time and investment to develop, but are priceless in terms of their ability to deliver and facilitate knowledge sharing and collaboration.
- HBM4EU chromates study: usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposurePublication . Ndaw, Sophie; Leso, Veruscka; Bousoumah, Radia; Rémy, Aurélie; Bocca, Beatrice; Duca, Radu Corneliu; Godderis, Lode; Hardy, Emilie; Janasik, Beata; van Nieuwenhuyse, An; Pinhal, Hermínia; Poels, Katrien; Porras, Simo P.; Ruggieri, Flavia; Santonen, Tiina; Santos, Sílvia Reis; Scheepers, Paul.T.J.; Silva, Maria João; Verdonck, Jelle; Viegas, Susana; Wasowicz, Wojciech; Iavicoli, Ivo; Aimonen, Kukka; Antoine, Guillaume; Anzion, Rob; Burgart, Manuella; Cattaneo, Andrea; Cavallo, Domenico M.; Costa, Alcina; De Palma, Giuseppe; Denis, Flavien; Forte, Giovanni; Gambelunghe, Angela; Hanser, Ogier; Ladeira, Carina; Leese, Elisabeth; Lehtinen, Risto; Louro, Henriqueta; Lovreglio, Piero; Majery, Nicole; Marsan, Philippe; Melczer, Mathieu; Miranda, Armandida; Ribeiro, Edna; Schaefers, Françoise; Senofonte, Marta; Seuanes, Filomena; van Dael, Maurice; Velin, RiittaOccupational exposures to hexavalent chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting, and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P–Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in both plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P–Cr concentrations. RBC-Cr and P–Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P–Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P–Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context.
- Potential health risk of endocrine disruptors in construction sector and plastics industry: a new paradigm in occupational healthPublication . Fucic, Aleksandra; Galea, Karen; Duca, Radu Corneliu; El Yamani, Mounia; Frery, Nadine; Godderis, Lode; Halldorsson, Thórhallur Ingi; Iavicoli, Ivo; Ndaw, Sophie; Ribeiro, Edna; Viegas, Susana; Moshammer, HannsEndocrine disruptors (EDs) belong to large and diverse groups of agents that may cause multiple biological effects associated with, for example, hormone imbalance and infertility, chronic diseases such as diabetes, genome damage, and cancer. The health risks related to the exposure to EDs are typically underestimated, less well characterized, and not regulated to the same extent as, for example, carcinogens. The increased production and utilization of identified or suspected EDs in many different technological processes raises new challenges with respect to occupational exposure settings and associated health risks. Due to the specific profile of health risk, occupational exposure to EDs demands a new paradigm in health risk assessment, a redefinition of exposure assessment, new effects biomarkers for occupational health surveillance and definition of limit values. The construction and plastics industries are among the strongest economic sectors, employing millions of workers globally. They also use large quantities of chemicals that are known or suspected EDs. Focusing on these two industries, this short communication discusses: (a) why occupational exposure to EDs needs a more specific approach to occupational health risk assessments, (b) identifies the current knowledge gaps, and (c) identifies and gives a rationale for a future occupational health paradigm, which will include ED biomarkers as a relevant parameter in occupational health risk assessment, surveillance and exposure prevention.
- Setting up a collaborative European human biological monitoring study on occupational exposure to hexavalent chromiumPublication . Santonen, Tiina; Alimonti, Alessandro; Bocca, Beatrice; Duca, Radu Corneliu; Galea, Karen S.; Godderis, Lode; Göen, Thomas; Gomes, Bruno; Hanser, Ogier; Iavicoli, Ivo; Janasik, Beata; Jones, Kate; Kiilunen, Mirja; Koch, Holger M.; Leese, Elizabeth; Leso, Veruscka; Louro, Henriqueta; Ndaw, Sophie; Porras, Simo P.; Robert, Alain; Ruggieri, Flavia; Scheepers, Paul T. J.; Silva, Maria J.; Viegas, Susana; Wasowicz, Wojciech; Castano, Argelia; Sepai, OvnairThe EU human biomonitoring initiative, HBM4EU, aims to coordinate and advance human biomonitoring (HBM) across Europe. Within its remit, the project is gathering new, policy-relevant, EU-wide data on occupational exposure to relevant priority chemicals and developing new approaches for occupational biomonitoring. In this manuscript, the hexavalent chromium (Cr(VI)) study design is presented as the first example of this HBM4EU approach. This study involves eight European countries and plans to recruit 400 workers performing Cr(VI) surface treatment e.g. electroplating or stainless steel welding activities. The aim is to collect new data on current occupational exposure to Cr(VI) in Europe and to test new methods for Cr biomonitoring, specifically the analysis of Cr(VI) in exhaled breath condensate (EBC) and Cr in red blood cells (RBC) in addition to traditional urinary total Cr analyses. Furthermore, exposure data will be complemented with early biological effects data, including genetic and epigenetic effects. Personal air samples and wipe samples are collected in parallel to help to inform the biomonitoring results. We present standard operational procedures (SOPs) to support the harmonized methodologies for the collection of occupational hygiene and HBM samples in different countries.