Browsing by Author "Ferreira, Frederico Castelo"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- In vitro assessment of three dimensional dense chitosan-based structures to be as bioabsorbable implantsPublication . Oliveira, Nuno Guitian; Sirgado, Tatiana; Reis, Luís; Pinto, Luís F.; Silva, Cláudia Lobato da; Ferreira, Frederico Castelo; Rodrigues, Maria Alexandra SousaChitosan biocompatibility and biodegradability properties make this biopolymer promising for the development of advanced internal fixation devices for orthopedic applications. This work presents a detailed study on the production and characterization of three dimensional (3D) dense, non-porous, chitosan-based structures, with the ability to be processed in different shapes, and also with high strength and stiffness. Such features are crucial for the application of such 3D structures as bioabsorbable implantable devices. The influence of chitosan's molecular weight and the addition of one plasticizer (glycerol) on 3D dense chitosan-based products' biomechanical properties were explored. Several specimens were produced and in vitro studies were performed in order to assess the cytotoxicity of these specimens and their physical behavior throughout the enzymatic degradation experiments. The results point out that glycerol does not impact on cytotoxicity and has a high impact in improving mechanical properties, both elasticity and compressive strength. In addition, human mesenchymal stem/stromal cells (MSC) were used as an ex-vivo model to study cell adhesion and proliferation on these structures, showing promising results with fold increase values in total cell number similar to the ones obtained in standard cell culture flasks. (C) 2014 Elsevier Ltd. All rights reserved.
- Processing and characterization of 3D dense chitosan pieces, for orthopedic applications, by adding plasticizersPublication . Figueiredo, Lígia; Moura, Carla; Pinto, Luís F. V.; Ferreira, Frederico Castelo; Rodrigues, AlexandraIn this work, plasticizer agents were incorporated in a chitosan based formulation, as a strategy to improve the fragile structure of chitosan based-materials. Three different plasticizers: ethylene glycol, glycerol and sorbitol, were blended with chitosan to prepare 3D dense chitosan specimens. The properties of the obtained structures were assessed for mechanical, microstructural, physical and biocompatibility behavior. The results obtained revealed that from the different specimens prepared, the blend of chitosan with glycerol has superior mechanical properties and good biological behavior, making this chitosan based formulation a good candidate to improve robust chitosan structures for the construction of bioabsorbable orthopedic implants.
- Strategy to improve the mechanical properties of bioabsorbable materials based on chitosan for orthopedic fixation applicationsPublication . Figueiredo, Lígia; Fonseca, Rita; Pinto, Luís F. V.; Ferreira, Frederico Castelo; Almeida, Amélia; Rodrigues, AlexandraBioabsorbable polymeric fixation devices have been used as an alternative to metallic implants in orthopedics, preventing the stress shielding effect and avoiding a second surgery for implant removal. However, several problems are still associated with current bioabsorbable implants, including the limited mechanical stiffness and strength, and the adverse tissue reactions generated. To minimize or even eliminate the problems associated with these implants, strategies have been developed to synthesize new implant materials based on chitosan. To overcome the brittle behavior of most 3D chitosan-based structures, glycerol and sorbitol were blended to chitosan and the effect of these plasticizers in the produced specimens was analyzed by flexural tests, Berkovich tests, scanning electron microscopy (SEM) and micro-CT analyzes. The improvement of the mechanical properties was also tested by adding ceramics, namely hydroxyapatite powder and biphasic mixtures of hydroxyapatite (HA) and beta-tricalcium phosphate (beta-TCP). In the plasticizers group, the best combination of the measured properties was obtained for chitosan with 10% glycerol (flexural strength of 53.8 MPa and indentation hardness of 19.4 kgf/mm(2)), while in the ceramics group the best mechanical behavior was obtained for chitosan with 10% HA+beta-TCP powder (flexural strength of 67.5 MPa and indentation hardness 28.2 kgf/mm(2)). All the tested material compositions were dense and homogeneous, fundamental condition for a good implant performance. These are encouraging results, which support the continued development of chitosan-based materials for orthopedic fixation applications.