| Nome: | Descrição: | Tamanho: | Formato: | |
|---|---|---|---|---|
| 3.66 MB | Adobe PDF |
Orientador(es)
Resumo(s)
The main goal of the present research work is to characterise a unidirectional fibre reinforced grout (UFRG), developed as an alternative material to strengthen RC structures using small thickness jacketing.
A high performance cementitious grout reinforced with continuous and unidirectional non-woven steel fibre mat has been developed for this purpose. It was expected that the optimization of the percentage and alignment of the steel fibres would yield a more efficient fibre grout. In fact, the composite should attain higher tensile strength with continuous fibres since the fibre embedment length is enough to prevent fibre pull-out.
An experimental programme was carried out to characterise the UFRG’s mechanical properties. Compressive tests were conducted on small thickness tubular specimens to enable the determination of the compressive strength and the static modulus of elasticity. The tensile strength was obtained from splitting tests performed on cubic specimens (DIN 1048-5).
Semi-empirical equations, based on the experimental results, are proposed to estimate UFRG’s modulus of elasticity, compressive strength and tensile strength.
Two strengthening solutions for RC structures using small thickness CFRP jacketing are presented.
Descrição
Palavras-chave
Unidirectional steel fibres Fibre reinforced grout Structural Strengthening Experimental
Contexto Educativo
Citação
GIÃO, Rita; LÚCIO, Valter; CHASTRE, Carlos – Characterisation of unidirectional fibre reinforced grout as a strengthening material for RC structures. Construction and Building Materials. ISSN 0950-0618. Vol. 137 (2017), pp. 272–287
Editora
Elsevier