| Nome: | Descrição: | Tamanho: | Formato: | |
|---|---|---|---|---|
| 1012.78 KB | Adobe PDF |
Orientador(es)
Resumo(s)
In this study, a coal fly ash material generated in a Portuguese coal thermal powerplant was tested as a low-cost adsorbent to remove dye molecules. Pre-treatment of the coal fly ash samples was not performed in order to reduce end use cost. Physical and chemical characterization revealed their inert nature and low effects lixiviation in aqueous media. Preliminary adsorption studies include adsorbent quantity, and adsorption kinetics. The adsorption studies focused on Mordant Orange 1 (Mo1) dye, but two other molecules, Rhodamine B (RhB) and Methylene Blue (MeB) were also included for comparison reasons. The adsorption isotherms were tested with different models including Langmuir, Freundlich and modified Langmuir-Freundlich. The effect of temperature, pH and unburn carbon in the adsorption process were also studied. The results show that adsorption capacity of the coal fly ash occurs mainly due to electroestatic interactions between the adsorbent surface and the adsorbate, which depends on the pH of the aqueous media and the surface chemistry of the material, quantified by the point of zero charge, pHpzc. These joint effects are responsible for the higher retention of Mo1 that is about 16 times higher, when compared to the other two molecules tested.
Descrição
Palavras-chave
Coal fly ash Waste valorization Mordant Orange 1 Dyes Adsorption Aqueous media
Contexto Educativo
Citação
ROSA, Teresa; [et al] – Coal fly ash waste, a low-cost adsorbent for the removal of Mordant Orange dye from aqueous media. Journal of the Brazilian Chemical Society. ISSN 0103-5053. Vol. 32, N.º 12 (2021), pp. 2245-2256.
Editora
Sociedade Brasileira de Química