Loading...
5 results
Search Results
Now showing 1 - 5 of 5
- Imaging exhumed lower continental crust in the distal Jequitinhonha basin, BrazilPublication . Loureiro, Afonso; Schnürle, P.; Klingelhoefer, Frauke; Afilhado, Alexandra; Pinheiro, J.; Evain, Mikael; Gallais, F.; Dias, Nuno; Rabineau, Marina; Baltzer, A.; Benabdellouahed, M.; Soares, J.; Fuck, R.; Cupertino, J. A.; Viana, Adriano Roessler; Matias, Luis; Moulin, Maryline; Aslanian, D.; Morvan, L.; Mazé, J. P.; Pierre, D.; Roudaut-Pitel, M.; Rio, I.; Alves, D.; Júnior, P. Barros; Biari, Youssef; Corela, C.; Crozon, J.; Duarte, J. L.; Ducatel, C.; Falcão, C.; Fernagu, P.; Lima, M. Vinicius Aparecido Gomes de; Piver, D. Le; Mokeddem, Z.; Pelleau, P.; Rigoti, C.; Roest, W.; Roudaut, M.Twelve combined wide-angle refraction and coincident multi-channel seismic profiles were acquired in the Jequitinhonha-Camamu-Almada, Jacuípe, and Sergipe-Alagoas basins, NE Brazil, during the SALSA experiment in 2014. Profiles SL11 and SL12 image the Jequitinhonha basin, perpendicularly to the coast, with 15 and 11 four-channel ocean-bottom seismometers, respectively. Profile SL10 runs parallel to the coast, crossing profiles SL11 and SL12, imaging the proximal Jequitinhonha and Almada basins with 17 ocean-bottom seismometers. Forward modelling, combined with pre-stack depth migration to increase the horizontal resolution of the velocity models, indicates that sediment thickness varies between 3.3 km and 6.2 km in the distal basin. Crustal thickness at the western edge of the profiles is of around 20 km, with velocity gradients indicating a continental origin. It decreases to less than 5 km in the distal basin, with high seismic velocities and gradients, not compatible with normal oceanic crust nor exhumed upper mantle. Typical oceanic crust is never imaged along these about 200 km-long profiles and we propose that the transitional crust in the Jequitinhonha basin is a made of exhumed lower continental crust.
- On the source of the 8 May 1939 Azores earthquake - tsunami observations and numerical modellingPublication . Reis, Cláudia; Omira, Rachid; Matias, Luis; Baptista, Maria Ana Carvalho VianaOn 8 May 1939, an earthquake (Ms7.1) occurred near the Azores archipelago, with an epicentre located close to the western end of the Gloria fault. Previous studies present different epicentre locations spreading over a large area, and two different types of focal mechanisms. Given these uncertainties, the interpretation of the seismological information in a complex tectonic environment between the Gloria Fault and the Terceira Ridge is a matter of debate. The event caused a small tsunami recorded in the Azores Islands. In this study, we use the tsunami observations and tsunami numerical modelling to select the earthquake fault rupture that best fits the tsunami observations. We consider the different focal mechanism solutions, perform tsunami numerical modelling, and compute synthetic tsunami waveforms at the tide gauge locations. We find that an earthquake caused by a low-angle dipping fault with dominant strike-slip movement generates a tsunami that reproduces well the record at Ponta Delgada tide gauge. Finally, in areas where earthquakes are rare, the study of ancient earthquakes must use all information available, namely tsunami observations and mareograph data.
- Ambient seismic noise tomography of SW Iberia integrating seafloor- and land-based dataPublication . Corela, Carlos; Silveira, Graça; Matias, Luis; Schimmel, Martin; Geissler, WolframWe used ambient seismic noise recorded by 24 Broadband Ocean Bottom Seismometers (OBS) deployed in the Gulf of Cadiz during the EC funded NEAREST project and seven broadband land stations located in the South of Portugal to image the sedimentary and crustal structure beneath the Eastern Atlantic and SW Iberia. We computed ambient noise cross-correlations to obtain empirical Green's functions (EGFs) between all station pairs using land seismometers and both OBS sensors, seismometers and hydrophones. Despite the great difference in the recording conditions and local crustal structure between the OBSs and land stations, we could compute EGFs, by applying a linear cross-correlation with running absolute mean average time normalization, followed by a time-frequency phase weighted stack. Dispersion analysis was then applied to the EGFs, between 4 and 20s period. The obtained dispersion curves allowed mapping the lateral variation of Rayleigh-wave group velocities, as a function of period. Finally, dispersion curves extracted from each cell of the 2D group velocity maps were inverted, as a function of depth, to obtain the 3D distribution of the shear-wave velocities. The 3-D shear wave velocity model, computed from joint inversion of OBSs and land stations data allowed to estimate the thickness of sediments and crust and the Moho depth. Despite the gap that exists between the OBSs and land station locations, our model displays a good correlation with the known geological structure. The derived sedimentary layer and crustal thicknesses and the obtained Moho depth are locally in agreement with the models proposed by other studies using near vertical, refraction and wide-angle seismic profiling. We conclude that ambient noise tomography could be a valuable tool to image oceanic domains, and also that it is possible to integrate seafloor- and land-based stations to derive a structure model in the transition domain between continent and ocean.
- Reply to comment on "Probabilistic Tsunami Hazard in the Northeast Atlantic From Near- and Far-Field Tectonic Sources'' by Fonseca (Pure and Applied Geophysics, 2016)Publication . Omira, Rachid; Matias, Luis; Baptista, Maria Ana Carvalho VianaThe recent events of the Indian Ocean 2004 and the Tohoku-Oki 2011 have brought to the fore the hazardous nature of the tsunami phenomenon. Consequently, understanding and quantifying the tsunami hazard have gained a significant interest from researchers worldwide. Traditionally, deterministic approach, based on the maximum credible event or the worst-case scenario, has been used to assess the tsunami hazard. However, the absence of a single comprehensive way to define this scenario makes the usefulness of the deterministic method limited (Geist and Lynett 2014). Probabilistic tsunami hazard assessment (PTHA), on the other hand, takes into consideration the contribution of multiple tsunamigenic sources to elaborate tsunami hazard maps. PTHA is now widely used in different tsunami-prone areas of the globe (Annaka et al. 2007; Thio et al. 2007; Sørensen et al. 2012; Yadav et al. 2013; Roshan et al. 2016). In the NE Atlantic, many efforts have been conducted in the aftermath of the Indian Ocean tsunami of 2004 to assess hazard posed by tsunamis. They mainly addressed the tsunami hazard through the deterministic approach with a particular focus on the coastal impact from the 1755-like event (Omira et al. 2010, 2011, 2013; Baptista et al. 2011). Alternatively, Omira et al. (2015) and, more recently, Omira et al. (2016) introduced the probabilistic tsunami hazard assessment in the NE Atlantic from sources of tectonic origin. We welcome the comment by Fonseca (2016) as it gives us the opportunity to better discuss the progress in the PTHA in the NE Atlantic. In his comment, Fonseca (2016) focuses on three main points: (1) the communication of the hazard; (2) the conservatism in the hazard analysis; (3) the uncertainty treatment. The reply to the comments raised by Fonseca (2016) will be addressed in the following sections.
- Accurate ocean bottom seismometer positioning method inspired by multilateration techniquePublication . Benazzouz, Omar; Pinheiro, Luis; Matias, Luis; Afilhado, Alexandra; Herold, Daniel; Haines, Seth S.The positioning of ocean bottom seismometers (OBS) is a key step in the processing flow of OBS data, especially in the case of self popup types of OBS instruments. The use of first arrivals from airgun shots, rather than relying on the acoustic transponders mounted in the OBS, is becoming a trend and generally leads to more accurate positioning due to the statistics from a large number of shots. In this paper, a linearization of the OBS positioning problem via the multilateration technique is discussed. The discussed linear solution solves jointly for the average water layer velocity and the OBS position using only shot locations and first arrival times as input data.