Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.21/7502
Título: Bonded joints of dissimilar adherends at very low temperatures - An adhesive selection approach
Autor: Anes, V.
Pedro, R.
Henriques, E.
Freitas, M.
Reis, L.
Palavras-chave: Adhesive selection
Adhesive micro cracks
Dissimilar materials
Bonded joint
Low temperatures
Stress analysis
Data: Out-2016
Editora: Elsevier
Citação: ANES, V.; [et al] - Bonded joints of dissimilar adherends at very low temperatures - An adhesive selection approach. Theoretical and Applied Fracture Mechanics. ISSN 0167-8442. Vol. 85, Special Issue, Part A (2016), pp. 99-112.
Resumo: Maintenance, repair and overhaul companies have been reporting corrosion failure events in the Airbus A320 CFM56-5b intakes. These intakes are attached to the power plant frame by a dissimilar material bonded joint, where liquid shim adhesive is used to avoid the dielectric formation between dissimilar materials. In previous works, the authors reported that the A320 intakes corrosion is a result of the adhesive inability to avoid the dielectric formation, which is a result of micro-cracks formation within the adhesive layer. The main reason that lead to these cracks is the adhesive aging and thermal cycling at very low temperatures, which quite often reach values lower than -50ºC. This paper studies the effect of negative thermal loading on dissimilar materials bonded joints. Two epoxy adhesives are studied and compared, namely the Hysol EA-934, which is the adhesive currently used in the A320 Airbus intakes, and the Hysol EA-9394, a second generation adhesive candidate to replace the actual adhesive. A numerical study was performed in order to simulate the adhesive joint using a finite element analysis commercial package, where several hypotheses were explored. These hypotheses where focused on the effects of several factors on the adhesive layer stress distribution. Factors such as temperature range, boundary conditions, variation of the coefficient of thermal expansion with temperature, and interfacial cracks between the adhesive layer and dissimilar adherend materials were analyzed. Results show that very low temperatures have a negative impact on the adhesives strength and micro-cracks formation may result from thermal loads below zero degrees Celsius, even for adhesives without any aging. Moreover, low temperatures in dissimilar materials bonded joints may create stress states that surpass the adhesive lap shear strength. Some conclusions are drawn regarding adhesive selection for dissimilar materials bonded joints in order to overcome these issues.
Peer review: yes
URI: http://hdl.handle.net/10400.21/7502
DOI: 10.1016/j.tafmec.2016.08.012
ISSN: 0167-8442
Versão do Editor: https://ac.els-cdn.com/S016784421630129X/1-s2.0-S016784421630129X-main.pdf?_tid=7bbad66c-c947-11e7-9491-00000aab0f6c&acdnat=1510669631_50f37ab4085bcfc3a2a7320ca4a08cce
Aparece nas colecções:ISEL - Eng. Mecan. - Comunicações

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
Bonded_VAnes_ADEM.pdf3,81 MBAdobe PDFVer/Abrir    Acesso Restrito. Solicitar cópia ao autor!

FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.