Utilize este identificador para referenciar este registo:
|Título:||n-Hexane hydroisomerisation over bifunctional Pt/MCM-22 catalysts. Influence of the mode of Pt introduction|
Silva, J. M.
Ribeiro, F. R.
Ribeiro, M. F.
|Editora:||Elsevier Science BV|
|Citação:||Martins A, Silva J, Ribeiro F, Guisnet M, Ribeiro M. n-Hexane hydroisomerisation over bifunctional Pt/MCM-22 catalysts. Influence of the mode of Pt introduction. Zeolites and Related Materials: Trends, Targets and Challenges, Proceedings of the 4TH International Feza Conference. 2008; 174, Part 2: 1135-1138..|
|Relatório da Série N.º:||Part B;|
|Resumo:||Three different methods were used to introduce 1.0 wt.% of Pt in bifunctional Pt/MCM-22 zeolite catalysts: ion exchange with Pt(NH3)(4)(2+), incipient wetness impregnation with PtCl6H2 and mechanical mixture with Pt/Al2O3. The Pt dispersion was estimated by transmission electron microscopy and the hydrogenating activity with toluene hydrogenation at 110 degrees C. From these experiments, it can be concluded that with the ion exchanged sample, platinum was located within the inner micropores and on the outer surface, whereas with the impregnated one, platinum was essentially on the outer surface under the form of large particles. With all the samples there is a fast initial decrease in the activity for n-hexane hydroisomerisation at 250 degrees C. With exchanged and impregnated samples, this decrease is followed by a plateau, the activity value being then higher with impregnated sample. For the sample prepared by mechanical mixture a continuous decrease in activity can be observed. All these differences can be related with the distinct locations of Pt.|
|Aparece nas colecções:||ISEL - Eng. Quim. Biol. - Artigos|
Ficheiros deste registo:
|n-Hexane hydroisomerisation over bifunctional Pt-MCM-22 catalysts. Influence of the mode of Pt introduction_rep.pdf||52,81 kB||Adobe PDF||Ver/Abrir|
Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.