Loading...
Research Project
Untitled
Funder
Authors
Publications
An extensive study on the chemical diversity of lipophilic extractives from Eucalyptus globulus wood
Publication . Gominho, Jorge; Lourenço, Ana; Marques, António Velez; Pereira, Helena
Three mature Eucalyptus globulus trees with 40 years of age were studied at three height levels (0%, 35%, and 60% of total tree height) and at three radial regions (sapwood, inner and outer heartwood). The composition of lipophilic extracts was evaluated and an extensive list of 202 compounds was reported for the first time. The fatty acids were the major chemical family, representing 40.8% of the total compounds, followed by phytosterols (19.0%), aromatics (10.5%) and triterpenes (10.4%). Saturated fatty acids accounted for 74.2% of total compounds (C-16(:0), C-24(:0) and C-26(:0) were predominant), beta-Sitosteml and stigmastanol were the main sterols (80 and 7% respectively), while aromatics were mainly represented by syringic acid, 4-hydroxy-3,5-dimethoxybenzaldehyde, vanillic acid, and vanillin. The main triterpenes were asiatic and arjunolic acids.
Reactivity of syringyl and guaiacyl lignin units and delignification kinetics in the kraft pulping of eucalyptus globulus wood using Py-Gc-Ms/FID
Publication . Lourenço, Ana; Gominho, Jorge; V Marques, A; Pereira, Helena
Eucalyptus globulus sapwood and heartwood showed no differences in lignin content (23.0% vs. 23.7%) and composition: syringyl-lignin (17.9% vs. 18.0%) and guaiacyl-lignin (4.8% vs. 5.2%). Delignification kinetics of S- and G-units in heartwood and sapwood was investigated by Py-GC–MS/FID at 130, 150 and 170 °C and modeled as double first-order reactions. Reactivity differences between S and G-units were small during the main pulping phase and the higher reactivity of S over G units was better expressed in the later pulping stage. The residual lignin composition in pulps was different from wood or from samples in the initial delignification stages, with more G and H-units. S/G ratio ranged from 3 to 4.5 when pulp residual lignin was higher than 10%, decreasing rapidly to less than 1. The S/H was initially around 20 (until 15% residual lignin), decreasing to 4 when residual lignin was about 3%.
Organizational Units
Description
Keywords
Contributors
Funders
Funding agency
Fundação para a Ciência e a Tecnologia
Funding programme
3599-PPCDT
Funding Award Number
PTDC/AGR-CFL/110419/2009