Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.21/706
Título: Repetitive Solid State Pulse Modulator Based on a DC Voltage Multiplier
Autor: Redondo, Luís Manuel dos Santos
Palavras-chave: Circuits
Data: 2009
Editora: IEEE
Citação: Redondo L M. Repetitive Solid State Pulse Modulator Based on a DC Voltage Multiplier. 2009; IEEE Pulsed Power Conference VOLS 1 AND 2: 399-403.
Relatório da Série N.º: 1-2
Resumo: A newly developed solid-state repetitive high-voltage (HV) pulse modulator topology created from the mature concept of the d.c. voltage multiplier (VM) is described. The proposed circuit is based in a voltage multiplier type circuit, where a number of d.c. capacitors share a common connection with different voltage rating in each one. Hence, besides the standard VM rectifier and coupling diodes, two solid-state on/off switches are used, in each stage, to switch from the typical charging VM mode to a pulse mode with the d.c. capacitors connected in series with the load. Due to the on/off semiconductor configuration, in half-bridge structures, the maximum voltage blocked by each one is the d.c. capacitor voltage in each stage. A 2 kV prototype is described and the results are compared with PSPICE simulations.
Peer review: yes
URI: http://hdl.handle.net/10400.21/706
ISBN: 978-1-4244-4064-1
Aparece nas colecções:ISEL - Eng. Electrotécn. - Artigos

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
REPETITIVE SOLID STATE PULSE MODULATOR BASED ON A DC VOLTAGE MULTIPLIER_rep.pdf50,91 kBAdobe PDFVer/Abrir


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.