Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.21/522
Título: A DC Voltage-Multiplier Circuit Working as a High-Voltage Pulse Generator
Autor: Redondo, Luís Manuel dos Santos
Palavras-chave: High-voltage (HV) techniques
Power semiconductor devices
Pulsed-power systems
Voltage multipliers (VMs)
Data: Out-2010
Editora: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Citação: Redondo L. A DC Voltage-Multiplier Circuit Working as a High-Voltage Pulse Generator. IEEE Transactions on Plasma Science. 2010; 38 (10).
Relatório da Série N.º: 10
Resumo: The intensive use of semiconductor devices enabled the development of a repetitive high-voltage pulse-generator topology from the dc voltage-multiplier (VM) concept. The proposed circuit is based on an odd VM-type circuit, where a number of dc capacitors share a common connection with different voltage ratings in each one, and the output voltage comes from a single capacitor. Standard VM rectifier and coupling diodes are used for charging the energy-storing capacitors, from an ac power supply, and two additional on/off semiconductors in each stage, to switch from the typical charging VM mode to a pulse mode with the dc energy-storing capacitors connected in series with the load. Results from a 2-kV experimental prototype with three stages, delivering a 10-mu s pulse with a 5-kHz repetition rate into a resistive load, are discussed. Additionally, the proposed circuit is compared against the solid-state Marx generator topology for the same peak input and output voltages.
Peer review: yes
URI: http://hdl.handle.net/10400.21/522
ISSN: 0093-3813
Aparece nas colecções:ISEL - Eng. Electrotécn. - Artigos



FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.